A.A. 2023/2024

A.A. 2022/2023

A.A. 2021/2022

A.A. 2020/2021

A.A. 2019/2020

A.A. 2018/2019

Torna all'elenco

Pubblicazioni su riviste internazionali:

1. A. Maffezzoli, J.M. Kenny, L.Nicolais "Welding of PEEK/Carbon Fiber Composite laminates" Sampe Journal., 25, (1989) pp. 35-39.
2. J.M. Kenny, A. Maffezzoli, L.Nicolais "A model for the thermal and chemorheological behavior of thermoset processing: II) Unsatured polyester based composites" Composite Science and Technology, 38, , (1990) pp. 339-358
3. A. Maffezzoli, J.M. Kenny, L.Nicolais "Mathematical modeling of the resin transfer molding of polyester based composite", Polimery, , gennaio 1990 pp. 5-9.
4. J.M. Kenny e A. Maffezzoli, "Crystallization kinetics of Poly(Phenylene sulfide) (PPS) and PPS/carbon fiber reinforced composites" Polymer Engineering and Science 31, (1991) pp. 607-614
5. A. Maffezzoli, J.M. Kenny and L. Nicolais, "Thermal Analysis of thermoplastic matrices for advanced composites materials: Poly(Phenilene Sulfide)" Thermochimica Acta, 199, (1992) p. 133-146.
6.  J.M. Kenny e A. Maffezzoli, "Modelling of welding processes for thermoplastic matrix composites", Composite Polymers, 4, (1991) pp 12-24
7. A. Trivisano, A. Maffezzoli, J.M. Kenny and L. Nicolais, "Mathematical modeling of the pultrusion of epoxy based composites", Advances in Polymer Technology. 10, (1990) p. 251-264
8.     J.M. Kenny, A Maffezzoli and L. Nicolais, "Modeling of the dynamic mechanical properties of semicrystalline thermoplastic matrix composites", Polymer Composites, 5, (1992) p. 386-393.
9.     A. Maffezzoli, L. Peterson, J.C. Seferis, J.M. Kenny, L. Nicolais, "Dielectric characterization of water sorption in epoxy resin matrices" Polymer Engineering and Science 33, (1993) p. 75-82.
10.     J.M. Kenny, A Maffezzoli e L. Nicolais, "A macrokinetic approach to crystallization modeling of semicrystalline thermoplastic matrices for advanced composites", Journal of Material Science 28, (1993) pp. 4994-5001
11.     J. Mijovic, J.M. Kenny, A. Maffezzoli, A. Trivisano, F. Bellucci e L. Nicolais, "The principles of dielectric mesurements for in-situ monitoring of composite processing" Composites Science and Technology 49, , (1993) pp. 277-290
12.     J.M. Kenny, A. Maffezzoli e L. Nicolais "A new kinetic model for polymer crystallization by calorimetric analysis" Thermochimica Acta 227, pp. 83-95 (1993).
13.     A.Maffezzoli, A.Trivisano, M.Opalicki, J.M. Kenny, J. Mijovic, e L. Nicolais "Correlation between dielectric and chemorheological properties during cure of epoxy based composites" Journal of Material Science 29, (1994), pp. 800-808
14. A. Maffezzoli, A. Della Pietra, S. Rengo, L. Nicolais e G. Valletta "Photopolymerization of dental composite matrices" Biomaterials 15, pp. 1221-1228, (1994).
15. A. Maffezzoli, R. Terzi e L. Nicolais "Cure behaviour of visible light activated dental composite. I Isothermal kinetcs" Journal of Materials Science: Materials in Medicine, 6, (1995) pp. 155-160
16. A. Maffezzoli, R. Terzi, e L. Nicolais "Cure behaviour of visible light activated dental composite. II Non-isothermal kinetics" Journal of Materials Science: Materials in Medicine, 6, (1995) pp. 161-166
17. L. Torre, A. Maffezzoli e J.M. Kenny "A macrokinetic approach to crystallization applied to New TPI (Thermoplastic Polyimide) as a model polymer" Journal of Applied Polymer Science 56 , (1995) pp. 985-993
18. L. Torre, A. Maffezzoli e L. Nicolais, "Process modelling of thermoset based composites" , Revue de l'insitut francais du pétrole, 50 N. 1, , (1995) pp. 135-139
19. A. Maffezzoli, J.M. Kenny e L.Torre "About the physical dimensions of the Avrami constant" Thermochmica Acta, 269, , (1995) pp.185-190
20. A. Maffezzoli e R. Terzi "Thermal analysis of visible light activated dental composites", Thermochmica Acta 269/270, , (1996) pp. 319-335
21. A. Maffezzoli, V. Luprano, F Esposito G. Montagna e L. Nicolais "Ultrasonic wave attenuation during water sorption in poly(2-hydroxy-ethyl-methacrylate) hydrogels" Polymer Engineering and Science, Vol 36, , (1996) p.1832-1838
22. A. Maffezzoli, "Polymerization kinetics of acrylic bone cements by differential scanning calorimetry" Journal of thermal analysis, Vol 47, 1996, p.35-49
23. V.A.M. Luprano, A. Maffezzoli, G. Montagna, "A study of the water sorption kinetic of poly(hema) hydrogels by SLAM and FTIR measurements" IEEE ultrasonics, Ferroelectrics and Frequency Control Society Transactions, Vol. 43, No. 5 (1996) p.948-955.
24. A.Maffezzoli, "Bulk crystallization kinetics of New TPI (Thermoplastic poly Imide) by differential calorimetric analysis" Materials Science Forum Vol. 203  (1996) pp. 25-30.
25. A. Maffezzoli, D. Ronca, G. Guida, I. Pochini e L. Nicolais, "In situ polymerization of acrylic bone cements" Journal of Materials Science: Materials in Medicine, vol. 8 (1997) pp. 75-83
26. A. Maffezzoli, L. Torre and J. M. Kenny "Determination of the crystallization enthalpy of New-TPI" Journal of Applied Polymer Science Vol. 67 No. 4, (1998) pp. 763-766.
27. A. Maffezzoli, V.A.M. Luprano, G. Montagna and L.Nicolais "Ultrasonic characterization of water sorption in Poly(2-Hydroxyethyl Methacrylate) hydrogels" Journal of Applied Polymer Science Vol. 67 No. 5, (1998) pp. 823-831.
28. L. Torre, J.M. Kenny e A. Maffezzoli, "Degradation behavior of a composite material for thermal protection systems. Part-I experimental characterization" Journal of Materials Science vol 33 (1998) pp. 3137-3143.
29. L. Torre, J.M. Kenny e A. Maffezzoli, "Degradation behavior of a composite material for thermal protection systems. Part-II process simulation" Journal of Materials Science vol 33 (1998) pp. 3145-3149.
30. A. Maffezzoli, R. Terzi "Effect of irradiation intensity on the isothermal photopolymerization kinetics of acrylic resins for stereolithography" Thermochimica Acta,  Vol 321 (1998) pp. 111-121.
31. A. Maffezzoli, A. Tarzia, D. Cannoletta G. Montagna e V.A.M. Luprano “Ultrasonic characterization of the kinetics of water sorption in hydrogels” Macromolecular Symposia, vol 138 (1999) pp. 149-155.
32. A. Maffezzoli, E. Quarta, V.A.M. Luprano, G. Montagna, L.Nicolais “Cure monitoring of epoxy matrices for composites by ultrasonic wave propagation” Journal of Applied Polymer Science, vol. 73 (1999) pp.1969-1977.
33. L. Torre, J. M. Kenny, G.Boghetich and A. Maffezzoli, “Degradation behaviour of a composite material for thermal protection systems. III: Char characterization” Journal of Materials Science vol 35 (2000) p. 4563 - 4566.
34. M. Frigione, A. Maffezzoli, D. Acierno, V.A.M. Luprano, G. Montagna, “Non destructive and in-situ monitoring of mechanical properties build up in epoxy adhesives for civil applications by propagation of ultrasonic waves” Polymer Engineering and Science, Vol. 40 No. 3 (2000) pp. 656-664
35. L. Torre, J.M. Kenny, A. Recca, V Siracusa, A. Tarzia, and A. Maffezzoli, “Crystallization of an aromatic Poly-ether-ketone (PK99) by calorimetric and X-ray analysis”, Journal of thermal analysis Vol. 61 (2000) pp. 565-578.
36. A.Licciulli, A. Greco e A. Maffezzoli, “Development of a pre-ceramic suspension for the free form fabrication of ceramic parts by stereolithography " Industrial ceramics Vol. 20 n. 2, (2000) pp. 97-99
37. V.A.M. Luprano, G. Montagna, B. Molinas A. Maffezzoli, “Glass-Rubber phase transformation detected in hydrogels by ultrasonic waves” journal of alloys and compounds vol 310 (2000) pp. 382-387
38. F. Micelli, A. Maffezzoli, R. Terzi and V.A.M. Luprano “ Characterisation of the Kinetic behaviour of resin Modified Glass-Ionomer Cements by DSC, TMA and ultrasonic wave propagation” ” Journal of Materials Science: Materials in Medicine, Vol 12, (2001) p. 151-156
39. S. Iannace, A. Maffezzoli, G. Leo e L. Nicolais “Influence of crystal and amorphous phase morphology on hydrolitic degradation of PLLA subjected to different processing conditions” Polymer , Vol. 42 (2001) p. 3799-3807
40. A. Greco A.Licciulli e A. Maffezzoli, “Stereolithography of ceramic suspensions” Journal of Materials Science Vol 36 (2001) p. 99-105.
41. A. Greco, M. Frigione, A. Maffezzoli, D. Acierno “Rotational moulding of recycled HDPE” Polymer Recycling, Vol 6 (2001) p. 23-33
42. G. Camino, A. Maffezzoli, M. Braglia, M. De Lazzaro, M. Zammarano, “Effects of inorganic hydroxides structure on fire retardant effectiveness and mechanical properties in ethylene-vinyl acetate copolymers” Polymer degradation and stability, vol 74 (2001) p.457-464.
43. M. Frigione, A. Maffezzoli e V.A.M. Luprano “Application of ultrasonic wave propagation to the cure monitoring of epoxy adhesives for restoration of concrete” Journal Polymer Engineering, Vol 21, (2001) pp.445-468
44. C. Pindinelli, G. Montagna, V.A.M. Luprano e A. Maffezzoli “Network development during epoxy curing: experimental ultrasonic data and theoretical predictions” Macromolecular Symposia, vol. 180 (2002) 73-88.
45. P.Lingois, L. Berglund, A.Greco and A. Maffezzoli“ Chemically induced residual stresses in dental composites” J. of Materials Science, Vol. 38 (2003) pp1321-1331
46. A. Licciulli, A. Maffezzoli, D. Diso, S. Tundo, M. Rella, G. Torsello e M. Mazzer, “ Sol gel preparation of selective emitters for thermophotovoltaic conversion” J. Of Sol-Gel Science and Technology, Vol. 26 (2003) 1119-1123.
47. D. Diso, A.Licciulli, A. Bianco, M. Lomascolo, G. Leo, M. Mazzer, S. Tundo, G. Torsello e A. Maffezzoli, “Erbium containing ceramic emitters for thermophotovoltaic energy conversion” Materials Science and Engineering: part B, Vol 98 (2003) pp.144-149.
48. A.Licciulli, D. Diso, G. Torsello, S. Tundo, A. Maffezzoli, M. Lomascolo e M. Mazzer “The challenge of high performance selective emitters for thermophotovoltaic applications” Semiconductor Science and Technology Vol. 18 (2003) pp. 174-183.
49. A. Greco, A. Maffezzoli and J. Vlachopoulos, “Simulation of heat transfer during rotational moulding” Advances in Polymer Technology Vol. 22 (2003) N. 4 pp.271-279.
50. M. Frigione, A. Maffezzoli, P. Finocchiaro, S. Failla, “Cure kinetics and properties of epoxy resins containing a phosphorous-based flame retardant” Advances in Polymer Technology Vol. 22 (2003) N. 4 pp. 329-342.
51. C. Esposito Corcione, A. Greco, A. Maffezzoli “Photopolymerization kinetics of an epoxy based resin for stereolithography” J. of Thermal Analysis and Calorimetry, Vol. 72 (2003) pp. 687-693.
52. F. Lionetto, A. Sannino, G. Mensitieri, A. Maffezzoli, “Evaluation of the degree of crosslinking of cellulose-based hydrogels: a comparison between different techniques”, Macromolecular Symposia  Vol. 200 (2003) pp. 199-207.
53. A. Greco e A. Maffezzoli, “Statistical and kinetic approaches for LLDPE melting modeling” J. of Applied polymer Science, Volume 89, (2003), pp:289-295
54. A. Sannino, A. Maffezzoli, L. Nicolais, “Introduction of molecular spacers between the crosslinks of a cellulose-based superabsorbent hydrogel: Effects on the equilibrium sorption properties” J. of applied polymer science Vol. 90, (2003), pp. 168-174.
55. A. Greco, A. Maffezzoli, “Polymer melting and polymer powder sintering by thermal analysis” J. of Thermal Analysis and Calorimetry, Vol 72, pp 1167–1174 (2003) DOI:J10.1023/A:1025096432699
56. A. Passaro, P. Corvaglia, O. Manni, L. Barone and A. Maffezzoli “Processing-properties relationship of sandwich panels with polypropylene-core and polypropylene-matrix composite skins”  Polymer Composites Vol 25(3) (2004) pp. 307-318
57. A. Sannino, M. Madaghiele, F. Conversano, G. Mele, A. Maffezzoli, P.A. Netti, L. Ambrosio, L. Nicolais “Cellulose derivatives-hyaluronic acid based microporous hydrogel crosslinked through DVS to modulating equilibrium sorption capacity and network stability” Biomacromolecules, vol 5 (2004), pp. 92-96.
58. F. Lionetto, R. Rizzo, V.A.M. Luprano, A. Maffezzoli, "Phase transformations in unsaturated polyester resins during the cure", Materials Science and Engineering: A-structural materials properties, microstructure and processing, vol 370, (2004) pp. 284-287
59. F. Lionetto, A. Licciulli, F. Montagna, A. Maffezzoli, “Piezoceramics: an introductive guide to their practical applications”, Ceramurgia/Ceramica Acta (C+CA), Vol. 34, (2004) , pp. 107-127
60. A. Greco and A. Maffezzoli Powder shape analysis and sintering behavior of high density polyethylene powders for rotational molding” Journal of Applied Polymer Science, Vol. 92, (2004), pp. 449–460
61. C. Esposito Corcione, A. Greco and A. Maffezzoli “Photopolymerization kinetics of an epoxy based resin for stereolithography” Journal of Applied Polymer Science vol. 92, (2004), pp. 3484-3491.
62. Alfonso Maffezzoli, Emanuela Calò, Simona Zurlo, Giuseppe Mele, Antonella Tarzia, Cristina Stifani “Cardanol based matrix biocomposites reinforced with natural fibres” Composite Science and Technology, Vol 64, (2004) pp. 839-845
63. M. Frigione, E. Calò, A. Maffezzoli, C. Carfagna, G. Malucelli “Kinetics Studies of Liquid Crystalline and Isotropic Vinyl Ester Resins”Macromolecular Chemistry & Physics, Vol. 205, pp. 2175-2184 (2004).
64. A.Licciulli, A. Maffezzoli, D.Diso, M.Mazzer, G.Torsello, S.Tundo, “Porous garnet coatings tailoring the emissivity of thermostructual materials” Journal of Sol-Gel Science and technology, vol 32 pp247–251 (2004).
65. A. Licciulli, C. Esposito Corcione, A. Greco, V. Amicarelli and A. Maffezzoli “Laser stereolitography of ZrO2 toughened Al2O3”, Journal of European Ceramic Society, vol 25 (2004) pp.1581-1589. doi:10.1016/j.jeurceramsoc.2003.12.024
66. F. Lionetto, A.Maffezzoli, M.A.Ottenhof, I.A. Farhat, J.R. Mitchell“The Retrogradation of Concentrated Wheat Starch Systems”Starch/Stärke 57 (2005) pp.16–24
67. F. Lionetto e A. Maffezzoli “Relaxations during post-cure of unsaturated polyester networks by ultrasonic wave propagation, dynamic mechanical analysis and dielectric analysis” J. of Polymer Science: Part B Polymer physics, Vol. 43, (5), (2005) pp. 596-602
68. C. Esposito Corcione, A. Greco, F. Montagna, A. Licciulli and A. Maffezzoli, “Silica moulds built by stereolithography”, J. of Materials Science, vol 40 (2005) pp.1-6
69. A. Sannino, A. Maffezzoli, L. Vasanelli, A. Ficarella, S. Capone, P. Siciliano “Monitoring the drying process of lasagna pasta through a novel sensing device-based method” J. of Food engineering Vol 69 (2005), pp. 51-59
70. F. Lionetto, A. Sannino, A. Maffezzoli, “Ultrasonic monitoring of the network formation in superabsorbent cellulose based hydrogels” Polymer vol 46 (2005) pp 1796-1803
71. A. Sannino, D. Larobina, G. Mensitieri A. Aldi and A. Maffezzoli, “Simultaneous Gravimetric and Calorimetric Analysis of Chloroform Sorption in Nanoporous Semicrystalline sPS” J. of Applied Polymer Science Vol. 96 (2005) pp.1675-1681.
72. A. Greco, A. Maffezzoli, O.Manni “Development of polymeric foams from recycled polyethylene and recycled gypsum” Polymer Degradation and Stability 90 (2005) pp.256-263
73. A. Sannino, F. Conversano, A. Esposito, A. Maffezzoli, “Polimeric meshes for internal sutures with differentiated adhesion on the two sides” J. of Materials science: materials in medicine vol. 16 (2005) pp. 289-296
74. Carola Esposito Corcione, Antonio Greco and Alfonso Maffezzoli, “Time- temperature and time- irradiation intensity superposition for photopolymerization of an epoxy based resin”  Polymer 46 (2005) p. 8018–8027
75. Francesca Lionetto, Francesco Montagna, Alfonso Maffezzoli “Ultrasonic Dynamic Mechanical Analysis of Polymers” Applied Rheology15:5 (2005) p.326-335.
76. A. Sannino, S. Pappadà, M- Madaghiele, A. Maffezzoli, L. Ambrosio, L. Nicolais “Crosslinking of cellulose derivatives and hyaluronic acid with water-soluble carbodiimide” Polymer Vol. 46, (2005) p. 11206-112122
77. A. Sannino, P.A. Netti, M. Madaghiele, V. Coccoli, A. Luciani, A. Maffezzoli, L. Nicolais ”Synthesis and charcterization of microporous PEG-based hydrogels” Journal of Biomedical Materials Research: part A  Vol 79A (2006) p.229-237
78. C. Esposito Corcione, A. Greco, A. Licciulli e A. Maffezzoli, “Free form fabrication of silica moulds for aluminium casting by stereolithography” Rapid Prototyping Journal vol. 12/4 (2006) p.184-188.
79. P. Corvaglia, A. Passaro, O. Manni, L. Barone and A. Maffezzoli, “Recycling of PP-based sandwich panels with continuous fibers composite skins”J. of Thermoplastic composite materials, Vol. 19, (2006) p.731-745.
80. A: Greco, C.Esposito Corcione e A. Maffezzoli, “Temperature evolution during stereolithography building with a commercial epoxy resin” Polymer Engineering e Science, Vol 46, (2006), p. 493-502.
81. Pedro Miguel Romero Tendero, Alfonso Jimenez, Antonio Greco, Alfonso Maffezzoli “Viscoelastic and thermal characterization of crosslinked PVC” European Polymer Journal, vol 42 (2006) p. 961-969
82. Francesca Lionetto., Alfonso Maffezzoli, Marie-Astrid Ottenhof, Imad A. Farhat, John R. Mitchell “Ultrasonic investigation of wheat retrogradation” J. of food engineering, Vol 75/2 (2006) pp 258-266
83. M. Frigione, E. Calo` ,A. Maffezzoli, D. Acierno, C. Carfagna, V. Ambrogi “Preformed Microspherical Inclusions for Rheological Control and Physical Property Modification of Epoxy Resins” J. of Applied Polymer Science Vol 100 (2006) pp. 748-757.
84. A. Licciulli, A. Chiechi, D. Diso and A. Maffezzoli, “Ceramic composites for automotive friction devices” Advances in Science and Technology Vol. 45 (2006) p. 1394-1398
85. A. Sannino, M. Madaghiele, M. G. Lionetto, T. Schettino, A. Maffezzoli, “A cellulose-based hydrogel as a potential bulking agent for hypocaloric diets: An in vitro biocompatibility study on rat intestine” Journal of Applied Polymer Science Volume 102, Issue 2, Pages:1524-1530 (2006)
86. A. Greco, C. Musardo, A. Maffezzoli, “Flexural creep behaviour of PP matrix woven composite” Composite Science and Technology vol. 67 (2007) p. 1148-1158
87. Francesca Lionetto, Antonella Tarzia, Miriam Coluccia, Alfonso Maffezzoli “Air-Coupled Ultrasonic Cure Monitoring of Unsaturated Polyester Resins” Macromolecular Symposia vol 247 (2007) p. 50-58
88. Francesca Lionetto, Giacomo Coluccia, Paolo D’Antona, Alfonso Maffezzoli “Gelation of waxy crude oils by ultrasonic and dynamic mechanical analysis” Rheologica Acta, Vol 46 (2007) pp. 601-609
89. F. Lionetto, A. Tarzia, A. Maffezzoli “Air-coupled ultrasound: a novel technique for monitoring the curing of thermosetting matrices”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency vol. 54, no. 7 (2007) 1437-1443.
90. Emanuela Calò, Giuseppe Mele, Alfonso Maffezzoli, Antonella Tarzia, Cristina Stifani and Selma E. Mazzetto “Synthesis of a Novel Benzoxazine Monomer Cardanol-Based and Environmentally Sustainable Production of Polymers and Bio-Composites” Green Chemistry vol. 9 (2007) 705-812
91. A. Sannino, S. Pappadà, L.Giotta, L. Valli, and  A. Maffezzoli “Spin coating of cellulose derivatives on QCM plates to obtain hydrogel-based fast sensors and actuator” Journal of Applied Polymer Science, vol. 106, (2007), P.3040-3050
92. C. Demitri, L. Mercurio, F. Montagna, A. Sannino, A. Maffezzoli “Acrylic based hydrogel phantom for in-vitro ultrasound contrast agent characterization” Virtual and Physical Prototyping Vol 2(4), (2007) pp. 191-196
93. A. Salomi, A. Greco, F. Felline, O. Manni, A. Maffezzoli, “A preliminary study on bladder-assisted rotomolding of thermoplastic polymer composites” Advances in Polymer Technology, Vol 26 N. 1 (2007) pp. 21-32.
94. C. Esposito Corcione, A. Fasiello, and  A. Maffezzoli, “Synthesis and characterization of bohemite reinforced epoxy nanocomposites” J. of Nanostructured polymers and Nanocomposites vol. 3 (2007) pp. 82-89
95. A. Greco, A. Maffezzoli, “Correction of melting peaks of different PE grades accounting for heat transfer in DSC samples” Polymer Testing vol 27 (2008) p.61-74
96. C. Esposito Corcione, P. Prinari, D. Cannoletta, G. Mensitieri, A. Maffezzoli “Synthesis and characterization of clay–nanocomposite solvent based polyurethane adhesives” International Journal of Adhesion and Adhesives vol 28 (2008) pp. 91-100.
97. C. Esposito Corcione, M. Frigione, A. Maffezzoli , G. Malucelli “Photo – DSC and real time – FT-IR kinetic study of a UV curable epoxy resin containing o-Boehmites” European Polymer Journal Vol 44 (2008) pp.2010–2023
98. Christian Demitri, Roberta Del Sole, Francesca Scalera, Alessandro Sannino, Giuseppe Vasapollo, Alfonso Maffezzoli, Luigi Ambrosio, Luigi Nicolais “Novel Superabsorbent Cellulose-Based HydrogelsCrosslinked with Citric Acid” Journal of Applied Polymer Science, vol. 110 (2008) pp. 2453-2460
99. A. Salomi, T. Garstka, K. Potter, A. Greco, Alfonso Maffezzoli "Spring-in angle as molding distortion for thermoplastic matrix composite" Composite Science and  Technology 68 (2008) pp. 3047–3054.
100. C. Pio, A. Greco, A. Maffezzoli, A. Marseglia, “Efficient utilization of plastic waste through product design and process adaptation: a case study on stiffness enhancement of beams produced from plastic lumber” Advances in Polymer Technology, Vol. 27, No. 3, pp. 133–142 (2008).
101. Demitri, Christian; Sannino, Alessandro; Conversano, Francesco, Casciaro, Sergio, Distante, Alessandro,Alfonso Maffezzoli “Hydrogel Based Tissue Mimicking Phantom for in-vitro Ultrasound Contrast Agents Studies” Journal of Biomedical Materials Research: Part B - Applied Biomaterials Vol. 87, Issue 2, pp. 338-345 (2008)
102. Francesca Lionetto,  Alfonso Maffezzoli, "Polymer characterization by ultrasonic wave propagation" Advances in Polymer Technology Vol 27 pp. 63-73 (2008).
103. Mauro Pollini; Alfonso Maffezzoli; Alessandro Sannino; Antonio Licciulli, L. Nicolais"Development of Silica Aerogel by not Supercritical method" Journal of applied polymer science, Volume 110, Issue 5, , Pages: 2563-2568 (2008).
104. Francesca Lionetto, Alfonso Maffezzoli "Rheological Charcterization of concentrated nanoclay dispersions in an organic solvent", Applied. Rheology vol 19(2) 23423 8 pagine (2009)
105. Carola Esposito Corcione, Alfonso Maffezzoli, "Glass transition in thermosetting clay-nanocomposite polyurethanes"  Thermochimica Acta, vol 465 pp. 43-48 (2009).
106. M.A. Aiello, F. Leuzzi, G. Centonze, Alfonso Maffezzoli "Use of steel fibres recovered from waste tyres as reinforcement in concrete: Pull-out behaviour, compressive and flexural strength" Waste Management vol 29 pp. 1960-1970 (2009).
107. Corcione, Carola; Malucelli, Giulio; Frigione, Mariaenrica; Maffezzoli, Alfonso "UV-curable Epoxy Systems containing Hyperbranched Polymers: kinetics investigation by p-DSC and real-time FT-IR experiments" Polymer Testing, Vol. 28, pp. 157-164 (2009).
108. Giuseppina Lanciano, Antonio Greco, Alfonso Maffezzoli, Leno Mascia, “Effects of thermal history in the ring opening polymerization of CBT and its mixtures with montmorillonite on the crystallization of the resulting poly(butylene terephthalate)” Thermochimica Acta vol. 493 pp. 61–67 (2009).
109. Silvio Pappadà, Rocco Rametta, Luca Toia, Alberto Coda, Luca Fumagalli and Alfonso Maffezzoli, " Embedding of superelastic shape memory alloy wires into composite structures: evaluation of impact properties" Journal of Materials Engineering and Performance, vol. 17, pp. 522-530 (2009)
110. Silvio Pappadà, Per Gren, Kourosh Tatar, Tord Gustafson, Rocco Rametta, Ettore Rossini and Alfonso Maffezzoli “Mechanical and vibration characteristics of laminated composite plates embedding shape memory alloy superelastic wires” Journal of Materials Engineering and Performance vol. 18  pp.531-537 (2009)
111. Carola Esposito Corcione,, Giuseppe Mensitieri, Alfonso Maffezzoli “Analysis of the structure and mass transport properties of nanocomposite polyurethane” Polymer Engineering and Science, vol 49, pp1708-1718 (2009).
112. Carola Esposito Corcione, M.G. Manera, Alfonso Maffezzoli, R. Rella "Synthesis and characterization of optically transparent epoxy matrix nanocomposites" Materials Science and Engineering part C, Vol 29 1798–1802 (2009)
113. M. Madaghiele, A. Piccinno, M. Saponaro, A. Maffezzoli, A. Sannino, "Collagen- and gelatine-based films sealing vascular prostheses: evaluation of the degree of crosslinking for optimal blood impermeability” Journal of materials science: materials in medicine Vol 20 pp. 1979-1989 (2009)
114. M. Pollini, M. Russo, A. Licciulli, A. Sannino, A. Maffezzoli” Characterization of antibacterial silver coated yarns” Journal of materials science: materials in medicine Vol 20 pp. 2361-2366 (2009)
115. Carola Esposito Corcione, D. Cannoletta, Alfonso Maffezzoli, "Effect of a nanodispersed clay fillers on glass transition of thermosetting polyurethane" Macromolecular symposia Vol. 286, Issue 1, pp. 180-186 (2009)
116. D. D'Amico, F. Martina, G. Ingrosso, G. Mele, A. Maffezzoli, A. Tarzia, C. Stifani, “Development and characterisation of jute reinforced natural matrix composites” International Journal of Materials and Product Technology Vol. 36, pp. 155 – 165 (2009)
117. Alessandro Sannino, Marta Madaghiele, Christian Demitri, Francesca Scalera, Annaclaudia Esposito, Vincenzo Esposito and Alfonso Maffezzoli “Development and characterization of cellulose based hydrogels for use as bulking agents” Journal of Applied Polymer Science Volume 115, Issue 3, Pages: 1438-1444 (2010)
118. A. Greco, F. Lionetto, L. Indennidate, A. Maffezzoli ”Nanofilled polyols for viscoelastic polyurethane foam” Polymer International, Vol. 59, pp. 486–491 (2010)
119. A.Greco, C. Esposito Corcione, A.Maffezzoli, “Water Vapor Permeability of Clay Nanocomposites Based on Amorphous PET” Defect and Diffusion Forum Vols. 297-301, pp 422-426 (2010)
120. R.Gennaro, A. Greco, A. Maffezzoli “Numerical simulation of the microscale impregnation in commingled thermoplastic composite yarns” Advances in Polymer Technology vol. 29 pp 122-130 (2010)
121. M.A. Esmeraldo, A.C. Barreto, J.E.B. Freitas, P.B.A. Fechine, A.S.B. Sombra, E. Corradini, G. Mele, A. Maffezzoli, S.E. Mazzetto “ Dwarf-green coconut fibers: a versatile natural renewable raw bioresource. Treatment, Morphology, and physiochemical properties“ BioResources Vol 5, No 4 pp 2478-2501, (2010)
122. S. Pappadà, R. Rametta, A. Passaro, L. Lanzilotto and A. Maffezzoli “Processing, mechanical properties, and interfacial bonding of a thermoplastic core-foam/composite-skin sandwich panel” Advances in Polymer Technology, vol. 29 No. 3 pp.137-145 (2010)
123. A. Greco, D. Brunetti, G. Renna, G. Mele, A. Maffezzoli, “Plasticizer for poly(vinyl chloride) from cardanol as a renewable resource material” , Polymer degradation and Stability, vol 95 pp. 2169-2174 (2010).
124. A.Greco, C. Esposito Corcione, A.Maffezzoli, A. Strafella  “Analysis of the structure and mass transport properties of clay nanocomposites based on amorphous PET” J. of Applied Polymer Science, 118; p. 3666–3672 (2010).
125. P. Campaner, D. D’Amico, P. Ferri, L. Longo, A. Maffezzoli, C. Stifani, A. Tarzia “Cardanol based matrix for jute reinforced pipes” Macromolecular Symposia Vol 296,  p. 526–530, (2010).
126. E. Calò, A. Greco, A. Maffezzoli, “Effects of diffusion of a naturally derived plasticizer from PVC” Polymer degradation and Stability, vol.  96 pp. 784-789 (2011).
127. F. Conversano, R. Franchini, C Demitri, L. Massoptier, F. Montagna, A.  Maffezzoli, A. Malvasi, S. Casciaro “Hepatic Vessel Segmentation for 3D Planning of Liver Surgery: Experimental Evaluation of a New Fully Automatic Algorithm” Academic Radiology, vol, 18 (4), p.461-470, (2011).
128. Carola Esposito Corcione, Anna Cavallo, Emanuela Pesce, Antonio Greco, Alfonso Maffezzoli, Evaluation of the degree of dispersion of nanofillers by mechanical, rheological and permeability analysis, Polymer Engineering and Science, 51(4); p. 1280–1285, (2011)
129. Antonio Greco, Alessandra Strafella, Carola La Tegola, Alfonso Maffezzoli, “Assessment of the Relevance of Sintering in Thermoplastic Commingled Yarn Consolidation”  Polymer Composites Vol. 32(4), Pages: 657–664, (2011)
130. R. Gennaro, F. Montagna, A. Maffezzoli, S. Fracasso, F. Fracasso “On-line consolidation of commingled polypropylene/glass roving during filament winding” Journal of Thermoplastic Composite Materials vol 24 p. 789-804 (2011).
131. Francesca Lionetto, Francesco Montagna and Alfonso Maffezzoli “Ultrasonic Transducers for Cure Monitoring: Design, Modelling and Validation“ Measurement Science and Technology Vol . 12 p. 124002 (8pp.) (2011).
132. Pollini M, Paladini F, Catalano M, Taurino A, Licciulli A, Maffezzoli A, Sannino A  “Antibacterial coatings on haemodialysis catheter by photochemical deposition of silver nanoparticles”. Journal Of Materials Science. Materials In Medicine, vol. 22, p. 2005-2012, (2011) ISSN: 0957-4530, doi: 10.1007/s10856-011-4380-x.
133. Pollini M, Paladini F, Licciulli A, Maffezzoli A, Nicolais L, Sannino. “Silver coated wool yarns with durable antibacterial properties” Journal Of Applied Polymer Science, vol. 125, p. 2239-2244 (2012), ISSN: 0021-8995, doi: 10.1002/app.36444
134. E. Calò, C. Massaro, R. Terzi, A. Cancellara, E. Pesce, M. Re, A. Greco, A. Maffezzoli,P.I. Gonzalez-Chi, Andrea Salomi “Rotational molding of polyamide-6 nanocomposites with improved flame retardancy” International Polymer Processing, vol. 27, pp. 370-377  (2012)
135. A. Greco, M. Rizzo e A. Maffezzoli, Effect of the addition of organically modified nanofiller on the relaxation behavior of a thermoplastic amorphous matrix, Thermochimica Acta vol. 543, pp. 226-231 (2012) DOI: 10.1016/j.tca.2012.05.030
136. Conversano F, Soloperto G, Greco A, Ragusa A, Casciaro E, Chiriacò F, Demitri C, Gigli G, Maffezzoli A, Casciaro S. “Echographic detectability of optoacoustic signals from low-concentration PEG-coated gold nanorods” International journal of nanomedicine, Volume 2012:7 Pages 4373 – 4389 (2012) DOI: 10.2147/IJN.S33908
137. Greco, A.,Maffezzoli A., Calò E., Massaro C., Terzi, R, “An investigation into sintering of PA6 nanocomposite powders for rotational molding” Journal of thermal analysis and calorimetry vol. 109 (3) (2012) pp. 1493-1502
138. Francesca Lionetto, Roberta Del Sole, Donato Cannoletta, Giuseppe Vasapollo and Alfonso Maffezzoli “Monitoring Wood Degradation during Weathering by Cellulose Crystallinity” Materials (ISSN 1996-1994) vol. 5 (2012) p. 1910-1922.
139. Antonio Greco, Alessia Timo and Alfonso Maffezzoli, “Development and Characterization of Amorphous Thermoplastic Matrix Graphene Nanocomposites” Materials (ISSN 1996-1994) vol. 5 (2012) pp. 1972-1985doi:10.3390/ma5101972
140. Silvio Pappadà, R. Rametta, A. Largo, A. Maffezzoli“ Low velocity impact response in composite plates embedding Shape Memory Alloy wires” Polymer Composites vol. 33 (5) (2012) pp. 655-664
141. Carola Esposito Corcione, Fabrizio Freuli,A. L’Erario and Alfonso Maffezzoli “The aspect ratio of epoxy matrix nanocomposites reinforced with graphene stacks” Plastics Research Online DOI 10.1002/pen.23292 (2012)
142. Carlos Ávila-Orta, Carlos Espinoza-González, Guillermo Martínez-Colunga, Darío Bueno Baqués, Francesca Lionetto, Alfonso Maffezzoli “An overview of progress and current challenges in ultrasonic treatment of polymer melts” Advances in Polymer Technology vol. 32, issue S1, pp. E582–E602, (2012) doi: 10.1002/adv.21303
143. Antonio Greco, Alfonso Maffezzoli, Giuseppe Buccoliero, Flavio Caretto and Giacinto Cornacchia “Thermal and chemical treatments of recycled carbon fibres for improved adhesion to polymeric matrix” Journal of composite materials vol. 47 (3) pp.  369–377 (2012)DOI: 10.1177/0021998312440133
144. A. Grieco, A. Maffezzoli “Optimization of parts placement in autoclave processing of composites” Applied Composite Materials vol 20 233–248(2013) DOI 10.1007/s10443-012-9265-8 (2013).
145. R. Gennaro, A. Greco and A.Maffezzoli, “Micro and macro impregnation of fabrics using thermoplastic matrices” Journal of Thermoplastic Composite Material, Vol. 26(4) pp. 527–543 (2013), DOI: 10.1177/0892705711425849
146. Salomi, A., Greco, A., Pacifico, T., Rametta, R. and Maffezzoli, A., “Processing and properties of a polymer/composite double/layer laminate”, Adv. Polym. Technol., Vol. 32 pp. E32-E43 (2013) DOI: 10.1002/adv.20267.
147. Carola Esposito Corcione, Alfonso Maffezzoli “Transport properties of graphite/epoxy composites:thermal, permeability and dielectric characterization” Polymer Testing, Vol. 32 pp. 880–888 (2013), DOI: 10.1016/j.polymertesting.2013.03.023.
148. A. Greco, A. Maffezzoli, “Two-dimensional and three-dimensional simulation of diffusion in nanocomposite with arbitrarily oriented lamellae” Journal of Membrane Science, Vol. 442, Pages 238–244 (2013), DOI: 10.1016/j.memsci.2013.04.038
149. M. Pollini, F. Paladini, A. Licciulli, A. Maffezzoli, A. Sannino, L. Nicolais “Antibacterial natural leather for application in the public transport system” Journal of Coatings Technology and Research, Vol. 10 Issue: 2   pp. 239-245   (2013) DOI: 10.1007/s11998-012-9439-1 
150. R. Assiro, L.Cappelli, M.Cascella, L.DeLorenzis, F.Grancagnolo, F.Ignatov, A. L’Erario , A.Maffezzoli, A.Miccoli, G.Onorato, M.Perillo, G.Piacentino, S. Rella, F.Rossetti, M.Spedicato, G.Tassielli, G.Zavarise, “Ultra-low mass drift  chambers” Nuclear Instruments and Methods in Physics ResearchA”  vol 718 pp. 443–445(2013)DOI: 10.1016/j.nima.2012.10.047
151. F. Lionetto, A. Maffezzoli, “Monitoring the Cure State of Thermosetting Resins by Ultrasound” Materials, Vol. 6, pp. 3783-3804; (2013) doi:10.3390/ma6093783
152. Christian Demitri, Francesca Scalera, Marta Madaghiele, Alessandro Sannino, Alfonso Maffezzoli“ Potential of cellulose-based superabsorbent hydrogels as water reservoir in agriculture, International Journal of Polymer Science, Article ID 435073, 6 pages Volume 2013 (2013)
153. Greco, A., Gennaro, R., Timo, A., Bonfantini, F., Maffezzoli, A.“A Comparative Study Between Bio-composites Obtained with Opuntia ficus indica Cladodes and Flax Fibers” Journal of Polymers and the Environment,Volume 21, Issue 4, pp. 910-916, (2013)DOI: 10.1007/s10924-013-0595-x.
154. Carola Esposito Corcione, Fabrizio Freuli, A. L’Erario and Alfonso Maffezzoli “The Aspect Ratio of Epoxy Matrix Nanocomposites Reinforced With Graphene Stacks” Polymer Engineering and Science,Vol.53, pp. 531–539 (2013),DOI 10.1002/pen.23292.
155. A. Greco, G. Romano, A. Maffezzoli, “Selective reinforcement of LLDPE components produced by rotational molding with thermoplastic matrix pultruded profiles”, Composites: Part B Vol. 56 pp. 157–162 (2014).
156. R. Gennaro, M. Christmann, A. Greco, G. Rieber, P. Mitschang, A. Maffezzoli, “Experimental Measurement of Transversal Micro- and Macro Permeability During Compression Molding of PP/Glass Composites” Polymer Composites Vol. 35 pp. 105–112, January 2014, DOI: 10.1002/pc.22639 (2014).
157. A. Greco, A. Maffezzoli, S. Forleo ”Sintering of PLLA powders for rotational molding” Thermochimica Acta, vol.582 pp. 59–67 (2014) DOI: http://dx.doi.org/10.1016/j.tca.2014.03.005
158. F. Lionetto, E. Calò, F. Di Benedetto, D. Pisignano, A, Maffezzoli “A methodology to orient carbon nanotubes in a thermosetting matrix“ Composite Science and Technology vol. 96, pp. 47-55 (2014) DOI: http://dx.doi.org/10.1016/j.compscitech.2014.02.016
159. A. Greco,  M. Frigione, A. Maffezzoli, A. Marseglia, A. Passaro “ A perspective on the Prowaste concept: efficiente utilization of plastic waste through product design and process innovation” Materials vol. 7 5385-5402 doi:10.3390/ma7075385
160. L. De Lorenzis, F. Grancagnolo, A. L’Erario, A. Maffezzoli, A. Miccoli, S.Rella M. Spedicato, G. Zavarise, “analysis and characterization of the mechanical structure for the i-tracker of the mu2e experiment” Nuclear Physics B (Proc. Suppl.) 248–250 pp. 134–136 (2014)
161. Marta Madaghiele, Marotta Francesco, Christian Demitri, Francesco Montagna, Alessandro Sannino, Alfonso Maffezzoli, “Development of semi- and grafted interpenetrating polymer networks (IPNs) based on  poly(ethylene glycol) diacrylate and collagen” Journal of applied biomaterial and functional materials Volume 12, pp 183-192, (2014), DOI:10.5301/jabfm.5000187.
162. Antonio Greco, Alfonso Maffezzoli, Giovanni Casciaro, Flavio Caretto, “Mechanical properties of basalt fibers and their adhesion to polypropylene matrices” Composites: Part B 67 pp. 233–238(2014), DOI: 10.1016/j.compositesb.2014.07.020
163. Marco Mauro, Maria Rosaria Acocella, Carola Esposito Corcione, Alfonso Maffezzoli, Gaetano Guerra, “Catalytic activity of graphite-based nanofillers on cure reaction of epoxy” Polymer, vol. 55, (2014)  pp. 5612-5615 DOI: 10.1016/j.polymer.2014.09.019
164. Francesca Scalera, Carola Esposito Corcione, Francesco Montagna, Alessandro Sannino, Alfonso Maffezzoli“  Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering” Ceramics international, vol 40 pp. 15455-15462 (2014)  DOI: 10.1016/j.ceramint.2014.06.117
165. Antonio Greco, Francesca Lionetto, Alfonso Maffezzoli, “Processing and Characterization of Amorphous Polyethylene Terephthalate Fibers for the Alignment of Carbon Nanofillers in Thermosetting Resins” Polymer Composites vol. 36 pp 1096-1103, (2015)  DOI 10.1002/pc.23366
166. G. Scarselli, E. Castorini, W. Panella, R.Nobile, A. Maffezzoli “Structural behaviour modelling of bolted joints in composite laminates subjected to cyclic loading”, Aerospace Science and Technology vol 43 pp. 89-95, (2015)  , DOI 10.1016/j.ast.2015.02.017
167. Silvio Pappadà, Andrea Salomi, Jeanette Montanaro,, Alessandra Passaro, Antonio Caruso, Alfonso Maffezzoli, “Fabrication of a thermoplastic matrix composite stiffened panel by induction welding” Aerospace Science and Technology, Volume 43,  (2015), Pages 314-320, DOI: 10.1016/j.ast.2015.03.013
168. F. Lionetto, R. Dell’Anna, F. Montagna, A. Maffezzoli “Ultrasonic assisted consolidation of commingled thermoplastic/glass fiber rovings” Frontiers in Materials: composite materials, Volume 2, article 32, pp. 1-9  (2015) DOI: 10.3389/fmats.2015.00032
169. Antonio Greco and Alfonso Maffezzoli, “Analysis of the suitability of poly-lactic acid in rotational molding process” Advances in Polymer Technology vol 34 n. 3, 21505, p.1-8, (2015) DOI: 10.1002/adv.21505
170. Antonio Greco and Alfonso Maffezzoli  “Rotational Molding of Poly(lactic acid): Effect of Polymer Grade and Granulometry” Advances in Polymer Technology (2015) DOI:10.1002/adv.21630
171. A. Turco, C. Malitesta, G. Barillaro, A. Greco, A. Maffezzoli and E. Mazzotta, J. Mater. Chem. A, “Magnetic and highly reusable macroporous superhydrophobic/superoleophilic PDMS/MWNTs nanocomposite for oils sorption from water” Journal of material chemistry A, vol. 3 pp. 17685–17696 (2015), DOI: 10.1039/C5TA04353K
172.  A. Greco, A. Maffezzoli, “Finite element simulation and analytical modeling of 3D multi scale diffusion in nanocomposites with permeable stacks” Modelling and Simulation in Materials Science and Engineering, 24 p. 015003 (16pp), (2015), doi:10.1088/0965-0393/24/1/015003.
173. A. Greco, A. Maffezzoli, “Finite Element Modeling of Multiscale Diffusion in Intercalated Nanocomposites” Journal of nanomaterials, Volume 2015, Article ID 482698, 11 pages (2015) http://dx.doi.org/10.1155/2015/482698
174. Maria Rosaria Acocella, Carola Esposito Corcione, Antonella Giuri, M. Maggio Alfonso Maffezzoli, Gaetano Guerra “Graphene oxide as a catalyst for ring opening reactions in amine crosslinking of epoxy resins” RSC Advances Vol. 6, pp. 23858–23865, (2016), DOI: 10.1039/C6RA00485G
175. A. Greco, A. Maffezzoli, “Rotational molding of biodegradable composites obtained with PLA reinforced by the wooden backbone of opuntia ficus indica cladodes”, Journal of applied polymer science 42447 (8 pages), (2015) DOI: 10.1002/APP.42447
176. Francesca Lionetto · Riccardo Dell’Anna · Francesco Montagna · Alfonso Maffezzoli “Modeling of continuous ultrasonic impregnation and consolidation of thermoplastic matrix composites“ Composites Part A: Applied Science and Manufacturing vol. 82 p. 119-129 (2016), DOI:10.1016/j.compositesa
177. Antonio Greco and Francesca Ferrari, Rosario Velardi, Mariaenrica Frigione, Alfonso Maffezzoli “Solubility And Durability Of Cardanol Derived Plasticizers for Soft PVC” International polymer processing Vol. 31, No 5. Pages: 577–586 (2016) doi: 10.3139/217.3237
178. Carlos Espinoza-Gonzalez; Carlos Avila-Orta; Guillermo Martinez-Colunga; Francesca Lionetto; Alfonso Maffezzoli, “A Measure of CNTs Dispersion in Polymers with Branched Molecular Architectures by UDMA” IEEE Transactions on Nanotechnology, vol 15 , pp. 731-737, (2016), DOI: 10.1109/TNANO.2016.2530697
179. Antonio Greco, Alfonso Maffezzoli, “Cardanol derivatives as innovative bio-plasticizers for poly-(lactic acid)” Polymer Degradation and Stability, Vol 132, pp. 213-219 (2016), DOI: 10.1016/j.polymdegradstab.2016.02.020
180. Mauro Zammarano, Valeria Cazzetta, Shonali Nazaré, J. Randy Shields, Yeon Seok Kim, Kathleen M. Hoffman, Alfonso Maffezzoli, and Rick Davis, “Smoldering and Flame Resistant Textiles via Conformal Barrier Formation”  Advanced Materials 1600617 p. 1-5 (2016) DOI: 10.1002/admi.201600617
181.  Antonio Greco, Francesca Ferrari, Roberta Del Sole, Alfonso Maffezzoli “Use of Cardanol Derivatives as Plasticizers for PVC” journal of vinyl & additive technology p. 1-9, (2016) DOI 10.1002/vnl.21585.
182. C. Esposito Corcione, M. R. Acocella, A. Giuri and A. Maffezzoli, “Epoxy Resin Catalyzed by Graphite-Based Nanofillers” International polymer processing, Vol. 31,  Pages 548-553 (2016), doi: 10.3139/217.3225
183. Antonio Greco, Francesca Ferrari, Alfonso Maffezzoli, Effect of the epoxidation yield of a cardanol derivative on the plasticization and durability of soft PVC, polymer degradation and stability, vol 134 pp. 220-226 (2016) DOI 10.1016/j.polymdegradstab.2016.10.010
184. Antonio Greco, Francesca Lionetto, Alfonso Maffezzoli, “Orientation of graphene nanoplatelets in thermosetting matrices”, IEEE Transactions on Nanotechnology, vol 15(6), pp877-883, (2016),  DOI: 10.1109/TNANO.2016.2553361
185. M. Pollini, F. Paladini, A. Sannino, A. Maffezzoli, “Development of hybrid cotton/hydrogel yarns with improved absorption properties for biomedical application” Materials Science and Engineering C, Vol. 63, p. 563-569 (2016), DOI: 10.1016/j.msec.2016.03.027
186. A. Greco, C. Esposoto Corcione,A. Maffezzoli, “Effect of multiscale diffusion on the permeability behavior of intercalated nanocomposites” Journal of Membrane Science, Vol. 505, pp 92-99 (2016), DOI: 10.1016/j.memsci.2016.01.029
187. Christian Demitri, Vincenzo Maria De Benedictis, Marta Madaghiele, Carola Esposito Corcione, Alfonso Maffezzoli “Nanostructured active chitosan-based films for food packaging applications: Effect of graphene stacks on mechanical properties”, Measurement: Journal of the international measurement confederation, Vol. 90, p. 418–423 (2016)
188. Frank Snijkers, Rossana Pasquino, Alfonso Maffezzoli “Curing and Viscoelasticity of Vitrimers” Soft Matter vol. 13, p. 258-268 (2017) DOI: 10.1039/c6sm00707d
189. Carola Esposito Corcione, Francesca Gervaso, Francesca Scalera, Francesco Montagna, Alessandro Sannino, Alfonso Maffezzoli, “The feasibility of printing polylactic acid–nanohydroxyapatite composites using a low-cost fused deposition modeling 3D printer” Journal of applied polymer science, vol 134 pp. 44656 (1 of 10) (2017) DOI: 10.1002/app.44656
190. Antonio Greco, Carola Esposito Corcione, Alfonso Maffezzoli “Diffusion in oriented lamellar nanocomposite: Numerical analysis of the effects of dispersion and intercalation” Computational Materials Science vol 133 p. 45–51, (2017) DOI: 10.1016/j.commatsci.2017.03.011
191. M. R. Acocella, C. Esposito Corcione,  A. Giuri M. Maggio, G. Guerra and A. Maffezzoli, “Catalytic activity of oxidized carbon black and graphene oxide for the crosslinking of Epoxy Resins” Polymers Vol 9, 133; pp. 1-15, doi:10.3390/polym9040133 (2017)
192. M. Dios, P.L. Gonzalez-R, D. Dios and A. Maffezzoli, “A mathematical modeling approach to optimize composite parts placement in autoclave” International Transactions in Operational Research, pp. 115-141 (2017) DOI: 10.1111/itor.12295.
193. Francesca Lionetto, Silvio Pappadà, Giuseppe Buccoliero, Alfonso Maffezzoli ” Finite element modeling of continuous induction welding of thermoplastic matrix composites” Materials & Design, vol 247 pp. 289-295 (2017) DOI: 10.1016/j.matdes.2017.02.024.
194. Francesca Lionetto, Frank Balle, Alfonso Maffezzoli “Hybrid ultrasonic spot welding of aluminum to carbon fiber reinforced epoxy composites” Journal of Materials Processing Technology vol 247 pp 289-295 (2017) DOI: 10.1016/j.jmatprotec.2017.05.002
195. G. Scarselli, C. Esposito Corcione, F. Nicassio, A.Maffezzoli “Adhesive joints with improved mechanical properties for aerospace applications” International Journal of Adhesion and Adhesives, Vol 75 pp. 174-180 (2017) DOI: 10.1016/j.ijadhadh.2017.03.012
196. Sanosh Kunjalukkal Padmanabhan, Carola Esposito Corcione, Rossella Nisi, Alfonso Maffezzoli, Antonio Licciulli, “PolyDiethyleneglycol–bisallyl carbonate matrix transparent nanocomposites reinforced with bacterial cellulose microfibrils”, European Polymer Journal, vol 93, pp. 192 -199 (2017) DOI: j.eurpolymj.2017.05.037.
197. Francesca Lionetto, Maria Nicolas Morillas, Silvio Pappadà, Giuseppe Buccoliero, Irene Fernandez Villegas, Alfonso Maffezzoli “Hybrid welding of carbon-fiber reinforced epoxy based composites” Composites: part A, vol. 104 pp 32-40 (2018). DOI 10.1016/j.compositesa.2017.10.021
198. Antonio Greco, Francesca Ferrari, Alfonso Maffezzoli, “UV and thermal stability of soft PVC plasticized with cardanol derivatives” Journal of Cleaner Production Vol. 164 (2017) pp. 757-764 (2017), DOI: j.jclepro.2017.07.009.
199. Pooyan Makvandi1, Carola Esposito Corcione, Federica Paladini, Anna Lucia Gallo, Francesco Montagna, Rezvan Jamaledin, Mauro Pollini, Alfonso Maffezzoli, “Antimicrobial modified hydroxyapatite composite dental bite by stereolithography” Polymers for Advanced Technologies, Vol 29 pp. 364–371 (2018) DOI: 10.1002/pat.4123.
200. Antonella Tarzia, Jeanette Montanaro, Michele Casiello, Cosimo Annese, Angelo Nacci, Alfonso Maffezzoli, “Synthesis, Curing, and Properties of an Epoxy Resin Derived from Gallic Acid” Bioresources Vol 13, p. 632-645 (2018) DOI: 10.15376/biores.13.1.632-645
201. E. Perez, C.J. Perez, C. Bernal, A. Greco, A. Maffezzoli “Mechanical Behavior of Fibers and Films Based on PP/Quartz Composites” Polymer composites vol 38(8), pp. 1631-1639 (2017) DOI 10.1002/pc.23731.
202. Francesca Lionetto, Silvio Pappadà, Giuseppe Buccoliero, Alfonso Maffezzoli “Resin pressure evolution during autoclave curing of epoxy matrix composites” Polymer Engineering and Science vol 57(6), pp. 631-637 (2017) DOI: 10.1002/pen.24568
203. Francesca Lionetto, Anna Moscatello Alfonso Maffezzoli “Effect of binder powders added to carbon fiber reinforcements on the chemorheology of an epoxy resin for composites” Composites Part B: Engineering, vol. 112, p. 243-250, (2017) DOI: 10.1016/j.compositesb.2016.12.031
204. Carola Esposito Corcione, Francesca Gervaso, Francesca Scalera, Francesco Montagna, Tommaso Maiullaro, Alessandro Sannino, Alfonso Maffezzoli “3D printing of hydroxyapatite polymer-based composites for bone tissue engineering” Journal of polymer engineering vol. 37(8), pp. 741-746, (2017) DOI 10.1515/polyeng-2016-0194
205. Riccardo Dell’Anna, Francesca Lionetto, Francesco Montagna and Alfonso Maffezzoli “Lay-Up and Consolidation of a Composite Pipe by In Situ UltrasonicWelding of a Thermoplastic Matrix Composite Tape” Materials 2018, 11, 786 (pp 1-11); doi:10.3390/ma11050786
206. Antonio Greco, Francesca Ferrari, Alfonso Maffezzoli, “Thermal analysis of poly(lactic acid) plasticized by cardanol derivatives” Journal of thermal analysis and calorimetry, Vol. 132 pp 1-7 (2018) DOI: 10.1007/s10973-018-7059-4
207. Antonella Tarzia, Jeanette Montanaro, Michele Casiello, Cosimo Annese, Angelo Nacci, Alfonso Maffezzoli, “Synthesis, Curing, and Properties of an Epoxy Resin Derived from Gallic Acid” Bioresources Vol 13, p. 632-645 (2018) DOI: 10.15376/biores.13.1.632-645
208. Valentina Donadei, Francesca Lionetto, Michael Wielandt, Arnt Offringa and Alfonso Maffezzoli “Effects of Blank Quality on Press-Formed PEKK/Carbon Composite Parts”, Materials vol 11, 1063, pp 1-12 (2018). doi:10.3390/ma11071063
209. Carola Esposito Corcione, Francesca Scalera, Francesca Gervaso, Francesco Montagna, Alessandro Sannino, Alfonso Maffezzoli, “One step solvent-free process for the fabrication of high loaded PLA/HA composite filament for 3D printing” Journal of thermal analysis and calorimetry”, Vol. 134 pp 575-582 (2018) doi: 10.1007/s10973-018-7155-5.
210. Francesca Lionetto, Claudio Mele, Paola Leo, Sonia D'Ostuni, Frank Balle Alfonso Maffezzoli “Ultrasonic spot welding of carbon fiber reinforced epoxy composites to aluminum: mechanical and electrochemical characterization” Composites Part B Vol. 144 pp. 134–142 (2018) doi:10.1016/j.compositesb.2018.02.02.
211. Antonio Greco, Francesca Ferrari, Roberta Del Sole, Alfonso Maffezzoli “Use of Cardanol Derivatives as Plasticizers for PVC” journal of vinyl & additive technology Vol. 24(S1) p. E62-E67, (2018) DOI 10.1002/vnl.21585.
212. Carola Esposito Corcione, Francesca Gervaso, Francesca Scalera, Sanosh Kunjalukkal Padmanabhan, Marta Madaghiele, Francesco Montagna, Alessandro Sannino, Antonio Licciulli, Alfonso Maffezzoli “Highly loaded hydroxyapatite microsphere/ PLA porous scaffolds obtained by fused deposition modelling” Ceramics International Col 45  pp. 2803–2810(2019). DOI: 10.1016/j.ceramint.2018.07.297
213. M.M. Soledad Lencina, Chiara Rizzo, Christian Demitri, Noemí Andreucetti, Alfonso Maffezzoli “Rheological analysis of thermo-responsive alginate/PNIPAAm graft copolymers synthesized by gamma radiation” Radiation Physics and Chemistry Vol. 156 pp. 38–43 (2019) doi: 10.1016/j.radphyschem.2018.10.021
214. Antonio Greco, Francesca Ferrari, Alfonso Maffezzoli “Mechanical properties of poly(lactid acid) plasticized by cardanol derivatives” Polymer degradation and stability, Vol. 159 pp. 199-204 (2019) DOI: 10.1016/j.polymdegradstab.2018.11.02
215. Antonio Greco, Francesca Ferrari, and Alfonso Maffezzoli “Processing of Super Tough Plasticized PLA by Rotational Molding” Advances in Polymer technology, Volume 2019, Article ID 3835829, 8 pages (2019). DOI: /10.1155/2019/3835829
216. Enrica Stasi, Antonella Giuri, Maurizio La Villetta, Domenico Cirillo, Gaetano Guerra, Alfonso Maffezzoli, Eleonora Ferraris, Carola Esposito Corcione, “Catalytic Activity of Oxidized Carbon Ashes Waste for the Crosslinking of Epoxy Resins” Polymers vol. 11 p.1011 (14 pages) (2019). doi:10.3390/polym11061011
217. Antonio Greco, Francesca Ferrari, Alfonso Maffezzoli, Pietro Delogu, Rosario Velardi, Alessia Timo, Antonella Tarzia, Alessandro Marseglia, Massimiliano Calò “Solubility Durability Of Cardanol Derived Plasticizers For Soft PVC”, accettato per la pubblicazione su Environmental Engineering and Management Journal
218. Massimo Mariello, Francesco Guido, Vincenzo Mariano Mastronardi, Roberto Giannuzzi, Luciana Algieri, Antonio Qualtieri, Alfonso Maffezzoli, Massimo De Vittorio “Reliability of Protective Coatings for Flexible Piezoelectric Transducers in Aqueous Environments” Micromachines vol 10, p. 739 (21 pages) (2019); doi:10.3390/mi10110739

 

 

Property-structure-processing relations in composite and polymer materials

See also the  MSTG Materials Science and Technology Group site  http://mstg.unisalento.it