Teresa PRIMO

Teresa PRIMO

Ricercatore Universitario

Dipartimento di Ingegneria dell'Innovazione

Centro Ecotekne Pal. O - S.P. 6, Lecce - Monteroni - LECCE (LE)

Area coordinamento laboratori, musei e servizi tecnici, Piano 1°

Telefono +39 0832 29 7807

PhD in Ingegneria Meccanica ed Industriale

Responsabile Tecnico del Laboratorio CAD-CAM Lecce, del Laboratorio "TRASFORMA" Lecce e del Laboratorio CAD-CAM Brindisi.

Area di competenza:

Tecnologie e Sistemi di Lavorazione, SSD: ING-IND/16

Recapiti aggiuntivi

teresa.primo@unisalento.it

Visualizza QR Code Scarica la Visit Card

Didattica

A.A. 2023/2024

ADVANCED TECHNOLOGIES AND ADDITIVE MANUFACTURING FOR AEROSPACE

Degree course AEROSPACE ENGINEERING

Course type Laurea Magistrale

Language INGLESE

Credits 9.0

Owner professor TERESA PRIMO

Teaching hours Ore totali di attività frontale: 81.0

  Ore erogate dal docente TERESA PRIMO: 54.0

Year taught 2023/2024

For matriculated on 2022/2023

Course year 2

Structure DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Subject matter CURRICULUM AEROSPACE TECHNOLOGY

Location Brindisi

FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Anno accademico di erogazione 2023/2024

Per immatricolati nel 2022/2023

Anno di corso 2

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso CURRICULUM AEROSPACE TECHNOLOGY

FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Anno accademico di erogazione 2023/2024

Per immatricolati nel 2022/2023

Anno di corso 2

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso CURRICULUM AEROSPACE DESIGN

TECNOLOGIA MECCANICA

Corso di laurea INGEGNERIA INDUSTRIALE

Tipo corso di studio Laurea

Lingua ITALIANO

Crediti 9.0

Docente titolare MAURIZIO CALABRESE

Ripartizione oraria Ore totali di attività frontale: 81.0

  Ore erogate dal docente TERESA PRIMO: 27.0

Anno accademico di erogazione 2023/2024

Per immatricolati nel 2021/2022

Anno di corso 3

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso PERCORSI COMUNE/GENERICO

Sede Brindisi

A.A. 2022/2023

FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Anno accademico di erogazione 2022/2023

Per immatricolati nel 2021/2022

Anno di corso 2

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso CURRICULUM AEROSPACE TECHNOLOGY

FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Anno accademico di erogazione 2022/2023

Per immatricolati nel 2021/2022

Anno di corso 2

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso CURRICULUM AEROSPACE DESIGN

TECNOLOGIA MECCANICA

Corso di laurea INGEGNERIA INDUSTRIALE

Tipo corso di studio Laurea

Lingua ITALIANO

Crediti 9.0

Ripartizione oraria Ore totali di attività frontale: 81.0

Anno accademico di erogazione 2022/2023

Per immatricolati nel 2020/2021

Anno di corso 3

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso PERCORSO COMUNE

Sede Brindisi

A.A. 2021/2022

FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Anno accademico di erogazione 2021/2022

Per immatricolati nel 2020/2021

Anno di corso 2

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso Percorso comune

TECNOLOGIA MECCANICA

Corso di laurea INGEGNERIA INDUSTRIALE

Tipo corso di studio Laurea

Lingua ITALIANO

Crediti 9.0

Ripartizione oraria Ore totali di attività frontale: 81.0

Anno accademico di erogazione 2021/2022

Per immatricolati nel 2019/2020

Anno di corso 3

Struttura DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Percorso PERCORSO COMUNE

Sede Brindisi

A.A. 2020/2021

ADDITIVE MANUFACTURING C.I.

Degree course AEROSPACE ENGINEERING

Course type Laurea Magistrale

Language INGLESE

Credits 3.0

Teaching hours Ore totali di attività frontale: 27.0

Year taught 2020/2021

For matriculated on 2019/2020

Course year 2

Structure DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Subject matter Percorso comune

A.A. 2019/2020

AERONAUTICAL TECHNOLOGIES

Degree course AEROSPACE ENGINEERING

Course type Laurea Magistrale

Language INGLESE

Credits 6.0

Teaching hours Ore totali di attività frontale: 54.0

Year taught 2019/2020

For matriculated on 2018/2019

Course year 2

Structure DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Subject matter PERCORSO COMUNE

A.A. 2018/2019

AERONAUTICAL TECHNOLOGIES

Degree course AEROSPACE ENGINEERING

Course type Laurea Magistrale

Language INGLESE

Credits 6.0

Teaching hours Ore totali di attività frontale: 54.0

Year taught 2018/2019

For matriculated on 2017/2018

Course year 2

Structure DIPARTIMENTO DI INGEGNERIA DELL'INNOVAZIONE

Subject matter PERCORSO COMUNE

Location Brindisi

Torna all'elenco
ADVANCED TECHNOLOGIES AND ADDITIVE MANUFACTURING FOR AEROSPACE

Degree course AEROSPACE ENGINEERING

Subject area ING-IND/16

Course type Laurea Magistrale

Credits 9.0

Owner professor TERESA PRIMO

Teaching hours Ore totali di attività frontale: 81.0

  Ore erogate dal docente TERESA PRIMO: 54.0

For matriculated on 2022/2023

Year taught 2023/2024

Course year 2

Semestre Secondo Semestre (dal 04/03/2024 al 14/06/2024)

Language INGLESE

Subject matter CURRICULUM AEROSPACE TECHNOLOGY (A101)

Location Brindisi

ADVANCED TECHNOLOGIES AND ADDITIVE MANUFACTURING FOR AEROSPACE (ING-IND/16)
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Per immatricolati nel 2022/2023

Anno accademico di erogazione 2023/2024

Anno di corso 2

Semestre Primo Semestre (dal 18/09/2023 al 22/12/2023)

Lingua

Percorso CURRICULUM AEROSPACE TECHNOLOGY (A101)

It is necessary to have passed Mechanical Technology exam. Knowledge of Technical Industrial Design exam is useful

The course aims to deepen the aspects related to production technologies applied in aeronautical constructions with particular reference to the choice and function performed by the construction materials and the transformation technologies connected to them.

In the field of plastic deformation technologies, the fundamental principles of plasticity theory,  formability and material behaviour, Sheet Metal Forming Processes and their applicability to the aeronautical sector will be illustrated.

At the same time, the aspects relating to assembly processes and in particular those relating to the welding of metallic materials, riveting and Adhesive Bonding of the components will be treated. Lastly non-destructive testing for verification of product quality will be tackled.

Numerical exercises will be carried out on some aspects covered in the theory part to familiarize with the physical quantities that characterize them, in addition to laboratory exercises that will be focused on tools for the finite element simulation of sheet metal forming.

  • Knowledge of elasto-plastic behavior of materials and rheological models
  • Basic knowledge of Assembly Processes
  • Basic knowledge for the Sheet Metal Forming Simulation

Frontal lessons

The exam consists of two test:

Oral: the student discusses the contents of the course, illustrating their level of knowledge and understanding of the topics covered.

Practical: it will be focused on the tools for the finite element simulation of sheet metal forming.

Elasto-plastic behavior of materials and Rheological Models

Sheet Metal Forming Processes

Formability and material behaviour

Sheet Metal Forming Simulation: One Step (Inverse) Method

Sheet Metal Forming Simulation: Incremental Explicit/Implicit FEA Methods

Welding Processes

Structural Assembly

Adhesive Bonding

  • Class Notes.
  • F.C. Campbell, Manufacturing Technology for Aerospace Structural materials, First Edition, Elsevier, 2006.
  • Mikell P. Groover, Fundamentals of Modern Manufacturing, Materials, Processes and Systems.
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I. (ING-IND/16)
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Per immatricolati nel 2022/2023

Anno accademico di erogazione 2023/2024

Anno di corso 2

Semestre Primo Semestre (dal 18/09/2023 al 22/12/2023)

Lingua

Percorso CURRICULUM AEROSPACE DESIGN (A100)

It is necessary to have passed Mechanical Technology exam. Knowledge of Technical Industrial Design exam is useful

The course aims to deepen the aspects related to production technologies applied in aeronautical constructions with particular reference to the choice and function performed by the construction materials and the transformation technologies connected to them.

In the field of plastic deformation technologies, the fundamental principles of plasticity theory,  formability and material behaviour, Sheet Metal Forming Processes and their applicability to the aeronautical sector will be illustrated.

At the same time, the aspects relating to assembly processes and in particular those relating to the welding of metallic materials, riveting and Adhesive Bonding of the components will be treated. Lastly non-destructive testing for verification of product quality will be tackled.

Numerical exercises will be carried out on some aspects covered in the theory part to familiarize with the physical quantities that characterize them, in addition to laboratory exercises that will be focused on tools for the finite element simulation of sheet metal forming.

  • Knowledge of elasto-plastic behavior of materials and rheological models
  • Basic knowledge of Assembly Processes
  • Basic knowledge for the Sheet Metal Forming Simulation

Frontal lessons

The exam consists of two test:

Oral: the student discusses the contents of the course, illustrating their level of knowledge and understanding of the topics covered.

Practical: it will be focused on the tools for the finite element simulation of sheet metal forming.

Elasto-plastic behavior of materials and Rheological Models

Sheet Metal Forming Processes

Formability and material behaviour

Sheet Metal Forming Simulation: One Step (Inverse) Method

Sheet Metal Forming Simulation: Incremental Explicit/Implicit FEA Methods

Welding Processes

Structural Assembly

Adhesive Bonding

  • Class Notes.
  • F.C. Campbell, Manufacturing Technology for Aerospace Structural materials, First Edition, Elsevier, 2006.
  • Mikell P. Groover, Fundamentals of Modern Manufacturing, Materials, Processes and Systems.
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I. (ING-IND/16)
TECNOLOGIA MECCANICA

Corso di laurea INGEGNERIA INDUSTRIALE

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea

Crediti 9.0

Docente titolare MAURIZIO CALABRESE

Ripartizione oraria Ore totali di attività frontale: 81.0

  Ore erogate dal docente TERESA PRIMO: 27.0

Per immatricolati nel 2021/2022

Anno accademico di erogazione 2023/2024

Anno di corso 3

Semestre Primo Semestre (dal 18/09/2023 al 22/12/2023)

Lingua ITALIANO

Percorso PERCORSI COMUNE/GENERICO (999)

Sede Brindisi

Lo studente deve possedere una buona conoscenza del Disegno tecnico industriale e dei materiali metallici con particolare riferimento a quelli ferrosi.

Il corso affronta le principali problematiche legate alle lavorazioni meccaniche dell’industria manifatturiera. L’obiettivo principale è quello di portare lo studente a conoscere gli aspetti fondamentali, sia teorici che descrittivi, dei processi tecnologici tradizionali impiegati nell'industria meccanica.

 

Risultati di apprendimento. Concluso il corso lo studente dovrebbe essere in grado di:

  • Saper scegliere le diverse lavorazioni che costituiranno il ciclo di lavorazione di un componente industriale.
  • Definire le attrezzature e gli utensili necessari ai diversi processi.
  • Individuare i parametri di lavorazione più adatti per ciascuna di esse sulla base di considerazioni funzionali, economiche e di qualità del prodotto finito.

Lo studente acquisirà le conoscenze legate ai processi di produzione tradizionali quali fonderia, lavorazioni per deformazione plastica e per asportazione di truciolo (macchine utensili) e quindi sarà in grado di comprendere le problematiche legate alla scelta e definizione delle sequenze operative di lavorazione (dalla scelta del  materiale e del processo primario per la realizzazione del semilavorato e del ciclo di lavorazione alle macchine utensili).

Inoltre, lo studente acquisirà la capacità di operare all’interno di un’azienda grazie alle esercitazioni numeriche ed ai lavori d’anno previsti riguardanti lo studio di fabbricazione di particolari meccanici.

L’autonomia di giudizio sarà acquisita grazie al fatto che ogni studente dovrà fare le scelte giustificandone la correttezza.I

l lavoro, individuale, sarà comunque svolto in collaborazione con altri studenti singoli (formazione del gruppo) e favorendo il colloquio fra gruppi.

La capacità di apprendimento sarà sviluppata grazie ai previsti confronti  fra gruppi e fra loro componenti, e tramite la prevista discussione degli elaborati finali.

Il corso prevede lezioni teoriche ed esercitazioni numeriche. 

L’esame prevede:

  • Esoneri: Modulo su fonderia e tolleranze; Modulo di taglio e deformazione plastica.
  • Per gli studenti che non hanno superato gli esoneri è prevista una prova scritta nelle date previste per gli appelli con copertura di tutti gli argomenti trattati durante il corso.
  • Superata la parte scritta verrà svolta una prova orale con discussione delle prove scritte e degli argomenti trattati durante corso.

Richiami sulle proprietà dei materiali metallici: Leghe metalliche ferrose e non e diagrammi Fe-C, diagrammi di Bain TTT, diagrammi TTC. Trattamenti termici e termochimici. Prove meccaniche: prova di durezza, prova di resilienza. Prove tecnologiche: prova di temprabilità (Jominy) e curve di Lamont. 

Lavorazioni per asportazione di truciolo: Schemi delle principali lavorazioni e principali moti caratteristici. I parametri tecnologici: p, a, vt, va nelle principali lavorazioni: tornitura e fresatura. La geometria dell'utensile elementare. Gli angoli caratteristici dell'utensile. Evoluzione del materiale dell'utensile. Criteri di usura utensile e le relazioni fra durata e velocità di taglio. Le forze in gioco nelle lavorazioni meccaniche. Condizioni ottimali di taglio: ve e vp. Meccanica di formazione del truciolo - Il taglio ortogonale. Il controllo numerico delle macchine utensili: linguaggio ISO, cicli Fissi e macroistruzioni. Esercitazioni sugli argomenti trattati. 

Qualità di prodotto: Tolleranze e loro dimensionamento in funzione delle specifiche funzionali. Rugosità superficiale: definizioni, normativa, parametri di profilo. 

Lavorazioni per deformazione plastica: La deformazione plastica dei materiali metallici a freddo e a caldo. L'influenza della velocità di deformazione e della temperatura sul comportamento del materiale. I principali processi di deformazione plastica massiva: laminazione, estrusione e trafilatura. Stampaggio di pezzi assialsimmetrici. Esercitazioni sugli argomenti trattati. 

Fonderia: Cenni alle tecniche di fonderia per la realizzazione di semilavorati definiti. Forme transitorie e permanenti. Modelli ed Anime per la realizzazione di corpi forati. La fonderia in terra. Le tecniche fusorie di colata sottopressione e centrifuga. I modelli transitori in cera e in polistirolo (Policast). Sistemi di colata e di materozzamento. Le spinte metallostatiche. 

Saldatura: Cenni su processo di saldatura dei materiali metallici: classificazione e confronto delle principali tecniche di saldatura convenzionali e non (Laser). 

[1] Groover M.P., Tecnologia Meccanica, Ed. Città Studi Edizioni, 2014.

[2] Giusti F., Santochi M. Tecnologia Meccanica, Ed. Casa editrice Ambrosiana, 2001 e successive edizioni

[3] Materiale didattico fornito dal docente, illustrato durante le lezioni ed esercitazioni in aula

TECNOLOGIA MECCANICA (ING-IND/16)
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Per immatricolati nel 2021/2022

Anno accademico di erogazione 2022/2023

Anno di corso 2

Lingua

Percorso CURRICULUM AEROSPACE TECHNOLOGY (A101)

It is necessary to have passed Mechanical Technology exam. Knowledge of Technical Industrial Design exam is useful

The course aims to deepen the aspects related to production technologies applied in aeronautical constructions with particular reference to the choice and function performed by the construction materials and the transformation technologies connected to them.

In the field of plastic deformation technologies, the fundamental principles of plasticity theory,  formability and material behaviour, Sheet Metal Forming Processes and their applicability to the aeronautical sector will be illustrated.

At the same time, the aspects relating to assembly processes and in particular those relating to the welding of metallic materials, riveting and Adhesive Bonding of the components will be treated. Lastly non-destructive testing for verification of product quality will be tackled.

Numerical exercises will be carried out on some aspects covered in the theory part to familiarize with the physical quantities that characterize them, in addition to laboratory exercises that will be focused on tools for the finite element simulation of sheet metal forming.

  • Knowledge of elasto-plastic behavior of materials and rheological models
  • Basic knowledge of Assembly Processes
  • Basic knowledge for the Sheet Metal Forming Simulation

Frontal lessons

The exam consists of two test:

Oral: the student discusses the contents of the course, illustrating their level of knowledge and understanding of the topics covered.

Practical: it will be focused on the tools for the finite element simulation of sheet metal forming.

Elasto-plastic behavior of materials and Rheological Models

Sheet Metal Forming Processes

Formability and material behaviour

Sheet Metal Forming Simulation: One Step (Inverse) Method

Sheet Metal Forming Simulation: Incremental Explicit/Implicit FEA Methods

Welding Processes

Structural Assembly

Adhesive Bonding

  • Class Notes.
  • F.C. Campbell, Manufacturing Technology for Aerospace Structural materials, First Edition, Elsevier, 2006.
  • Mikell P. Groover, Fundamentals of Modern Manufacturing, Materials, Processes and Systems.
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I. (ING-IND/16)
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Per immatricolati nel 2021/2022

Anno accademico di erogazione 2022/2023

Anno di corso 2

Lingua

Percorso CURRICULUM AEROSPACE DESIGN (A100)

It is necessary to have passed Mechanical Technology exam. Knowledge of Technical Industrial Design exam is useful

The course aims to deepen the aspects related to production technologies applied in aeronautical constructions with particular reference to the choice and function performed by the construction materials and the transformation technologies connected to them.

In the field of plastic deformation technologies, the fundamental principles of plasticity theory,  formability and material behaviour, Sheet Metal Forming Processes and their applicability to the aeronautical sector will be illustrated.

At the same time, the aspects relating to assembly processes and in particular those relating to the welding of metallic materials, riveting and Adhesive Bonding of the components will be treated. Lastly non-destructive testing for verification of product quality will be tackled.

Numerical exercises will be carried out on some aspects covered in the theory part to familiarize with the physical quantities that characterize them, in addition to laboratory exercises that will be focused on tools for the finite element simulation of sheet metal forming.

  • Knowledge of elasto-plastic behavior of materials and rheological models
  • Basic knowledge of Assembly Processes
  • Basic knowledge for the Sheet Metal Forming Simulation

Frontal lessons

The exam consists of two test:

Oral: the student discusses the contents of the course, illustrating their level of knowledge and understanding of the topics covered.

Practical: it will be focused on the tools for the finite element simulation of sheet metal forming.

Elasto-plastic behavior of materials and Rheological Models

Sheet Metal Forming Processes

Formability and material behaviour

Sheet Metal Forming Simulation: One Step (Inverse) Method

Sheet Metal Forming Simulation: Incremental Explicit/Implicit FEA Methods

Welding Processes

Structural Assembly

Adhesive Bonding

  • Class Notes.
  • F.C. Campbell, Manufacturing Technology for Aerospace Structural materials, First Edition, Elsevier, 2006.
  • Mikell P. Groover, Fundamentals of Modern Manufacturing, Materials, Processes and Systems.
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I. (ING-IND/16)
TECNOLOGIA MECCANICA

Corso di laurea INGEGNERIA INDUSTRIALE

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea

Crediti 9.0

Ripartizione oraria Ore totali di attività frontale: 81.0

Per immatricolati nel 2020/2021

Anno accademico di erogazione 2022/2023

Anno di corso 3

Semestre Secondo Semestre (dal 01/03/2023 al 09/06/2023)

Lingua ITALIANO

Percorso PERCORSO COMUNE (999)

Sede Brindisi

Lo studente deve possedere una buona conoscenza del Disegno tecnico industriale e dei materiali metallici con particolare riferimento a quelli ferrosi.

Il corso affronta le principali problematiche legate alle lavorazioni meccaniche dell’industria manifatturiera. L’obiettivo principale è quello di portare lo studente a conoscere gli aspetti fondamentali, sia teorici che descrittivi, dei processi tecnologici tradizionali impiegati nell'industria meccanica.

 

Risultati di apprendimento. Concluso il corso lo studente dovrebbe essere in grado di:

  • Saper scegliere le diverse lavorazioni che costituiranno il ciclo di lavorazione di un componente industriale.
  • Definire le attrezzature e gli utensili necessari ai diversi processi.
  • Individuare i parametri di lavorazione più adatti per ciascuna di esse sulla base di considerazioni funzionali, economiche e di qualità del prodotto finito.

Lo studente acquisirà le conoscenze legate ai processi di produzione tradizionali quali fonderia, lavorazioni per deformazione plastica e per asportazione di truciolo (macchine utensili) e quindi sarà in grado di comprendere le problematiche legate alla scelta e definizione delle sequenze operative di lavorazione (dalla scelta del  materiale e del processo primario per la realizzazione del semilavorato e del ciclo di lavorazione alle macchine utensili).

Inoltre, lo studente acquisirà la capacità di operare all’interno di un’azienda grazie alle esercitazioni numeriche ed ai lavori d’anno previsti riguardanti lo studio di fabbricazione di particolari meccanici.

L’autonomia di giudizio sarà acquisita grazie al fatto che ogni studente dovrà fare le scelte giustificandone la correttezza.I

l lavoro, individuale, sarà comunque svolto in collaborazione con altri studenti singoli (formazione del gruppo) e favorendo il colloquio fra gruppi.

La capacità di apprendimento sarà sviluppata grazie ai previsti confronti  fra gruppi e fra loro componenti, e tramite la prevista discussione degli elaborati finali.

Il corso prevede lezioni teoriche ed esercitazioni numeriche. 

L’esame prevede:

  • Esoneri: Modulo su fonderia e tolleranze; Modulo di taglio e deformazione plastica.
  • Per gli studenti che non hanno superato gli esoneri è prevista una prova scritta nelle date previste per gli appelli con copertura di tutti gli argomenti trattati durante il corso.
  • Superata la parte scritta verrà svolta una prova orale con discussione delle prove scritte e degli argomenti trattati durante corso.

Richiami sulle proprietà dei materiali metallici: Leghe metalliche ferrose e non e diagrammi Fe-C, diagrammi di Bain TTT, diagrammi TTC. Trattamenti termici e termochimici. Prove meccaniche: prova di durezza, prova di resilienza. Prove tecnologiche: prova di temprabilità (Jominy) e curve di Lamont. 

Lavorazioni per asportazione di truciolo: Schemi delle principali lavorazioni e principali moti caratteristici. I parametri tecnologici: p, a, vt, va nelle principali lavorazioni: tornitura e fresatura. La geometria dell'utensile elementare. Gli angoli caratteristici dell'utensile. Evoluzione del materiale dell'utensile. Criteri di usura utensile e le relazioni fra durata e velocità di taglio. Le forze in gioco nelle lavorazioni meccaniche. Condizioni ottimali di taglio: ve e vp. Meccanica di formazione del truciolo - Il taglio ortogonale. Il controllo numerico delle macchine utensili: linguaggio ISO, cicli Fissi e macroistruzioni. Esercitazioni sugli argomenti trattati. 

Qualità di prodotto: Tolleranze e loro dimensionamento in funzione delle specifiche funzionali. Rugosità superficiale: definizioni, normativa, parametri di profilo. 

Lavorazioni per deformazione plastica: La deformazione plastica dei materiali metallici a freddo e a caldo. L'influenza della velocità di deformazione e della temperatura sul comportamento del materiale. I principali processi di deformazione plastica massiva: laminazione, estrusione e trafilatura. Stampaggio di pezzi assialsimmetrici. Esercitazioni sugli argomenti trattati. 

Fonderia: Cenni alle tecniche di fonderia per la realizzazione di semilavorati definiti. Forme transitorie e permanenti. Modelli ed Anime per la realizzazione di corpi forati. La fonderia in terra. Le tecniche fusorie di colata sottopressione e centrifuga. I modelli transitori in cera e in polistirolo (Policast). Sistemi di colata e di materozzamento. Le spinte metallostatiche. 

Saldatura: Cenni su processo di saldatura dei materiali metallici: classificazione e confronto delle principali tecniche di saldatura convenzionali e non (Laser). 

[1] Groover M.P., Tecnologia Meccanica, Ed. Città Studi Edizioni, 2014.

[2] Giusti F., Santochi M. Tecnologia Meccanica, Ed. Casa editrice Ambrosiana, 2001 e successive edizioni

[3] Materiale didattico fornito dal docente, illustrato durante le lezioni ed esercitazioni in aula

TECNOLOGIA MECCANICA (ING-IND/16)
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I.

Corso di laurea AEROSPACE ENGINEERING

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea Magistrale

Crediti 3.0

Ripartizione oraria Ore totali di attività frontale: 27.0

Per immatricolati nel 2020/2021

Anno accademico di erogazione 2021/2022

Anno di corso 2

Semestre Primo Semestre (dal 20/09/2021 al 17/12/2021)

Lingua

Percorso Percorso comune (999)

It is necessary to have passed Mechanical Technology exam. Knowledge of Technical Industrial Design exam is useful

The course aims to deepen the aspects related to production technologies applied in aeronautical constructions with particular reference to the choice and function performed by the construction materials and the transformation technologies connected to them.

In the field of plastic deformation technologies, the fundamental principles of plasticity theory,  formability and material behaviour, Sheet Metal Forming Processes and their applicability to the aeronautical sector will be illustrated.

At the same time, the aspects relating to assembly processes and in particular those relating to the welding of metallic materials, riveting and Adhesive Bonding of the components will be treated. Lastly non-destructive testing for verification of product quality will be tackled.

Numerical exercises will be carried out on some aspects covered in the theory part to familiarize with the physical quantities that characterize them, in addition to laboratory exercises that will be focused on tools for the finite element simulation of sheet metal forming.

  • Knowledge of elasto-plastic behavior of materials and rheological models
  • Basic knowledge of Assembly Processes
  • Basic knowledge for the Sheet Metal Forming Simulation

Frontal lessons

The exam consists of two test:

Oral: the student discusses the contents of the course, illustrating their level of knowledge and understanding of the topics covered.

Practical: it will be focused on the tools for the finite element simulation of sheet metal forming.

Elasto-plastic behavior of materials and Rheological Models

Sheet Metal Forming Processes

Formability and material behaviour

Sheet Metal Forming Simulation: One Step (Inverse) Method

Sheet Metal Forming Simulation: Incremental Explicit/Implicit FEA Methods

Welding Processes

Structural Assembly

Adhesive Bonding

  • Class Notes.
  • F.C. Campbell, Manufacturing Technology for Aerospace Structural materials, First Edition, Elsevier, 2006.
  • Mikell P. Groover, Fundamentals of Modern Manufacturing, Materials, Processes and Systems.
FUNDAMENTALS OF AEROSPACE TECHNOLOGIES C.I. (ING-IND/16)
TECNOLOGIA MECCANICA

Corso di laurea INGEGNERIA INDUSTRIALE

Settore Scientifico Disciplinare ING-IND/16

Tipo corso di studio Laurea

Crediti 9.0

Ripartizione oraria Ore totali di attività frontale: 81.0

Per immatricolati nel 2019/2020

Anno accademico di erogazione 2021/2022

Anno di corso 3

Semestre Secondo Semestre (dal 01/03/2022 al 10/06/2022)

Lingua ITALIANO

Percorso PERCORSO COMUNE (999)

Sede Brindisi

Lo studente deve possedere una buona conoscenza del Disegno tecnico industriale e dei materiali metallici con particolare riferimento a quelli ferrosi.

Il corso affronta le principali problematiche legate alle lavorazioni meccaniche dell’industria manifatturiera. L’obiettivo principale è quello di portare lo studente a conoscere gli aspetti fondamentali, sia teorici che descrittivi, dei processi tecnologici tradizionali impiegati nell'industria meccanica.

 

Risultati di apprendimento. Concluso il corso lo studente dovrebbe essere in grado di:

  • Saper scegliere le diverse lavorazioni che costituiranno il ciclo di lavorazione di un componente industriale.
  • Definire le attrezzature e gli utensili necessari ai diversi processi.
  • Individuare i parametri di lavorazione più adatti per ciascuna di esse sulla base di considerazioni funzionali, economiche e di qualità del prodotto finito.

Lo studente acquisirà le conoscenze legate ai processi di produzione tradizionali quali fonderia, lavorazioni per deformazione plastica e per asportazione di truciolo (macchine utensili) e quindi sarà in grado di comprendere le problematiche legate alla scelta e definizione delle sequenze operative di lavorazione (dalla scelta del  materiale e del processo primario per la realizzazione del semilavorato e del ciclo di lavorazione alle macchine utensili).

Inoltre, lo studente acquisirà la capacità di operare all’interno di un’azienda grazie alle esercitazioni numeriche ed ai lavori d’anno previsti riguardanti lo studio di fabbricazione di particolari meccanici.

L’autonomia di giudizio sarà acquisita grazie al fatto che ogni studente dovrà fare le scelte giustificandone la correttezza.I

l lavoro, individuale, sarà comunque svolto in collaborazione con altri studenti singoli (formazione del gruppo) e favorendo il colloquio fra gruppi.

La capacità di apprendimento sarà sviluppata grazie ai previsti confronti  fra gruppi e fra loro componenti, e tramite la prevista discussione degli elaborati finali.

Il corso prevede lezioni teoriche ed esercitazioni numeriche. 

L’esame prevede:

  • Esoneri: Modulo su fonderia e tolleranze; Modulo di taglio e deformazione plastica.
  • Per gli studenti che non hanno superato gli esoneri è prevista una prova scritta nelle date previste per gli appelli con copertura di tutti gli argomenti trattati durante il corso.
  • Superata la parte scritta verrà svolta una prova orale con discussione delle prove scritte e degli argomenti trattati durante corso.

Richiami sulle proprietà dei materiali metallici: Leghe metalliche ferrose e non e diagrammi Fe-C, diagrammi di Bain TTT, diagrammi TTC. Trattamenti termici e termochimici. Prove meccaniche: prova di durezza, prova di resilienza. Prove tecnologiche: prova di temprabilità (Jominy) e curve di Lamont. 

Lavorazioni per asportazione di truciolo: Schemi delle principali lavorazioni e principali moti caratteristici. I parametri tecnologici: p, a, vt, va nelle principali lavorazioni: tornitura e fresatura. La geometria dell'utensile elementare. Gli angoli caratteristici dell'utensile. Evoluzione del materiale dell'utensile. Criteri di usura utensile e le relazioni fra durata e velocità di taglio. Le forze in gioco nelle lavorazioni meccaniche. Condizioni ottimali di taglio: ve e vp. Meccanica di formazione del truciolo - Il taglio ortogonale. Il controllo numerico delle macchine utensili: linguaggio ISO, cicli Fissi e macroistruzioni. Esercitazioni sugli argomenti trattati. 

Qualità di prodotto: Tolleranze e loro dimensionamento in funzione delle specifiche funzionali. Rugosità superficiale: definizioni, normativa, parametri di profilo. 

Lavorazioni per deformazione plastica: La deformazione plastica dei materiali metallici a freddo e a caldo. L'influenza della velocità di deformazione e della temperatura sul comportamento del materiale. I principali processi di deformazione plastica massiva: laminazione, estrusione e trafilatura. Stampaggio di pezzi assialsimmetrici. Esercitazioni sugli argomenti trattati. 

Fonderia: Cenni alle tecniche di fonderia per la realizzazione di semilavorati definiti. Forme transitorie e permanenti. Modelli ed Anime per la realizzazione di corpi forati. La fonderia in terra. Le tecniche fusorie di colata sottopressione e centrifuga. I modelli transitori in cera e in polistirolo (Policast). Sistemi di colata e di materozzamento. Le spinte metallostatiche. 

Saldatura: Cenni su processo di saldatura dei materiali metallici: classificazione e confronto delle principali tecniche di saldatura convenzionali e non (Laser). 

[1] Groover M.P., Tecnologia Meccanica, Ed. Città Studi Edizioni, 2014.

[2] Giusti F., Santochi M. Tecnologia Meccanica, Ed. Casa editrice Ambrosiana, 2001 e successive edizioni

[3] Materiale didattico fornito dal docente, illustrato durante le lezioni ed esercitazioni in aula

TECNOLOGIA MECCANICA (ING-IND/16)
ADDITIVE MANUFACTURING C.I.

Degree course AEROSPACE ENGINEERING

Subject area ING-IND/16

Course type Laurea Magistrale

Credits 3.0

Teaching hours Ore totali di attività frontale: 27.0

For matriculated on 2019/2020

Year taught 2020/2021

Course year 2

Semestre Primo Semestre (dal 22/09/2020 al 18/12/2020)

Language INGLESE

Subject matter Percorso comune (999)

Knowledge of Technical Industrial Design is useful.

The course aims to provide an overview of Additive Manufacturing processes, explain their underlying physical principles, discuss current research and an appreciation for why AM is so important to many branches of industry.

It will be outlined the rapid development of this technology from humble beginnings that showed promise but still requiring much development, to one that is now maturing and showing real benefit to product development organizations.

In order to take maximum advantage from the capabilities of additive metal technology in the most economical way, will be studied how to design for this technology by following its principles. At the same time, the aspects relating to the design for additive metal manufacturing (DFAM) concept and, the act of integrating product design and additive manufacturing principles into one activity, will be illustrated.

The course introduces some of the DFAM rules of the additive metal technology by going through the details of its capabilities and constraints.

Laboratory exercises will be carried out by 3D printer with FFF (Fused Filament Fabrication) and Wax Jet Printing technology, in addition to laboratory exercises that will be focused on tools for the finite element simulation of additive processes.

  • Knowledge for characterization and use of Additive Manufacturing technologies.
  • Basic knowledge of Design for Additive Manufacturing.

Frontal lessons and computer lab exercises

The exam consists of an oral test where the student discusses the contents of the course, illustrating their level of knowledge and understanding of the topics covered.

According to the academic calendar.

- Additive manufacturing production

- Classification of additive manufacturing processes

- Overview of existing manufacturers and their specific equipment

- Additive manufacturing technologies for metallic materials: METAL POWDER, METAL WIRE, METAL SHEETS

- Powder Fusion Mechanisms (solid-state sintering, chemically-induced binding, liquid-phase sintering, full melting)

- AM technologies for plastic component production (powder, solid and liquid material)

- Additive Manufacturing Process Steps

- Design for Additive Manufacturing

- Additive manufacturing technologies and applications in the aerospace industry

- Finite element simulation techniques for additive manufacturing and its application to case studies

Testi di riferimento

  • Class Notes.
ADDITIVE MANUFACTURING C.I. (ING-IND/16)
AERONAUTICAL TECHNOLOGIES

Degree course AEROSPACE ENGINEERING

Subject area ING-IND/16

Course type Laurea Magistrale

Credits 6.0

Teaching hours Ore totali di attività frontale: 54.0

For matriculated on 2018/2019

Year taught 2019/2020

Course year 2

Semestre Secondo Semestre (dal 02/03/2020 al 05/06/2020)

Language INGLESE

Subject matter PERCORSO COMUNE (999)

It is necessary to have passed Mechanical Technology exam. Knowledge of Technical Industrial Design exam is useful.

The course aims to deepen the aspects related to production technologies applied in aeronautical constructions with particular reference to the choice and function performed by the construction materials and the transformation technologies connected to them.

The materials/technologies solutions mainly used for realization of airframe and structures engine will be discussed. The aspects related to the “Workability of materials, for aeronautical application, by chip removal technologies” will be treated. The processes by plastic deformation will be analyzed. The main elements that characterize the Additive Manufacturing technologies will be provided.

The study and classification of light alloys for aeronautical application as well as superalloys for airframe and engine applications will be addressed. In particular, for the nickel and titanium superalloys, the main aspects that characterize their metallurgy and workability will be studied by comparison with the applications. In the field of plastic deformation technologies, the fundamental principles of super plastic forming and its applicability to the aeronautical sector will be illustrated.

At the same time, the aspects relating to assembly processes and in particular those relating to the welding of metallic materials and riveting of the components will be treated. Lastly non-destructive testing for verification of product quality will be tackled.

Numerical exercises will be carried out on some aspects covered in the theory part to familiarize with the physical quantities that characterize them, in addition to laboratory exercises that will be focused on tools for the finite element simulation of: chip removal, forging and additive processes.

  • Knowledge of materials for aeronautical application and processes for their transformation
  • Basic knowledge for the characterization of Nichel and Titanium superalloys
  • Basic knowledge for characterization and use of Additive Manufacturing technologies
  • Basic knowledge for finite element simulation of chip removal, forging and additive processes.

Frontal lessons and computer lab exercises

The exam consists of two tests:

  1. in the first test (written), the student must solve a task related to the topics covered during the course; the test aims to determine student's ability to perform autonomously calculations related to the physical quantities that characterize the machining processes discussed during the course.
  2. in the second test (oral) the student discusses both the written and other contents of the course, illustrating their level of knowledge and understanding of the topics covered and in order to make relevant cinematic and dynamic analysis.

According to the academic calendar.

  • Critical analysis of materials/processes for aeronautical application by comparison with the reference context.
  • Exercises on the topics covered.
  • Machinability by chip removal of materials for aeronautical application.
  • Exercises on the topics covered.
  • Hot workability of metallic materials: Forging.
  • Aluminum, Nichel and Titanium alloys.
  • Jointing technologies: welding, bonding, fasteners.
  • Super plastic forming technology.
  • Additive Manufacturing technology.
  • Non-destructive quality control technologies.
  • Finite element simulation techniques for machining by chip removal, forging, additive and their application to case studies.

Testi di riferimento

  • Class Notes.
  • F.C. Campbell, Manufacturing Technology for Aerospace Structural materials, First Edition, Elsevier, 2006.
  • Mikell P. Groover, Tecnologia Meccanica.
AERONAUTICAL TECHNOLOGIES (ING-IND/16)
AERONAUTICAL TECHNOLOGIES

Degree course AEROSPACE ENGINEERING

Subject area ING-IND/16

Course type Laurea Magistrale

Credits 6.0

Teaching hours Ore totali di attività frontale: 54.0

For matriculated on 2017/2018

Year taught 2018/2019

Course year 2

Semestre Secondo Semestre (dal 04/03/2019 al 04/06/2019)

Language INGLESE

Subject matter PERCORSO COMUNE (999)

Location Brindisi

It is necessary to have passed Mechanical Technology exam. Knowledge of Technical Industrial Design exam is useful.

The course aims to deepen the aspects related to production technologies applied in aeronautical constructions with particular reference to the choice and function performed by the construction materials and the transformation technologies connected to them.

The materials/technologies solutions mainly used for realization of airframe and structures engine will be discussed. The aspects related to the “Workability of materials, for aeronautical application, by chip removal technologies” will be treated. The processes by plastic deformation will be analyzed. The main elements that characterize the Additive Manufacturing technologies will be provided.

The study and classification of light alloys for aeronautical application as well as superalloys for airframe and engine applications will be addressed. In particular, for the nickel and titanium superalloys, the main aspects that characterize their metallurgy and workability will be studied by comparison with the applications. In the field of plastic deformation technologies, the fundamental principles of super plastic forming and its applicability to the aeronautical sector will be illustrated.

At the same time, the aspects relating to assembly processes and in particular those relating to the welding of metallic materials and riveting of the components will be treated. Lastly non-destructive testing for verification of product quality will be tackled.

Numerical exercises will be carried out on some aspects covered in the theory part to familiarize with the physical quantities that characterize them, in addition to laboratory exercises that will be focused on tools for the finite element simulation of: chip removal and forging processes.

  • Knowledge of materials for aeronautical application and processes for their transformation
  • Basic knowledge for the characterization of Nichel and Titanium superalloys
  • Basic knowledge for characterization and use of Additive Manufacturing technologies
  • Basic knowledge for finite element simulation of chip removal, forging and additive processes.

Frontal lessons and computer lab exercises

The exam consists of two tests:

  1. in the first test (written), the student must solve a task related to the topics covered during the course; the test aims to determine student's ability to perform autonomously calculations related to the physical quantities that characterize the machining processes discussed during the course.
  2. in the second test (oral) the student discusses both the written and other contents of the course, illustrating their level of knowledge and understanding of the topics covered and in order to make relevant cinematic and dynamic analysis.

According to the academic calendar.

  • Critical analysis of materials/processes for aeronautical application by comparison with the reference context.
  • Exercises on the topics covered.
  • Machinability by chip removal of materials for aeronautical application.
  • Exercises on the topics covered.
  • Hot workability of metallic materials: Forging.
  • Aluminum, Nichel and Titanium alloys.
  • Jointing technologies: welding, bonding, fasteners.
  • Super plastic forming technology.
  • Additive Manufacturing technology.
  • Non-destructive quality control technologies.
  • Design to cost.
  • Finite element simulation techniques for machining by chip removal and forging and their application to case studies.

Testi di riferimento

  • Class Notes.
  • F.C. Campbell, Manufacturing Technology for Aerospace Structural materials, First Edition, Elsevier, 2006.
  • Mikell P. Groover, Tecnologia Meccanica.
AERONAUTICAL TECHNOLOGIES (ING-IND/16)

Pubblicazioni

  1. R. Rella, P. Siciliano, F. Quaranta, T. Primo, L. Valli, L. Schenetti, A. Mucci, D. Iarossi, “Gas sensing measurements and analysis of the optical properties of poly-[3-(butylthio)thiophene] Langmuir – Blodgett films”, “Sensors and Actuators B, 3431 (2000)”.
  2. Bardaro D., Corvaglia P., Manni O., Modarelli R., Primo T., “Numerical modelling of solid and hollow FRP-confined concrete members”, TCN CAE 2005 (International Conference on CAE and Computational Technologies for Industry), 5-8 October 2005 Lecce.
  3. Poster: Bardaro D., Corvaglia P., Manni O., Modarelli R., Primo T., Spagnolo M., “Experimental Study and Numerical Modelling of Solid and Hollow Frp-Confined Concrete Members”, Faculdade de Engenharia da Universidade do Porto, 10-12 April, 2006.
  4. Bardaro D., Corvaglia P., Manni O., Modarelli R., Primo T., “Experimental and numerical study of the behaviour of solid and hollow-core FRP-confined concrete columns”, 2nd International fib Congress, Napoli, 5-8, June 2006.
  5. Del Prete A., Primo T., De Vitis A. A., “Non Deterministic Approach in Metal Forming Springback Simulation”, Key Engineering Materials Vol. 344 (2007), pp. 399-410, © (2007) Trans Tech Publications, Switzerland, doi: 10.4028/www.scientific.net/KEM.344.399, ISBN 0-87849-437-5, ISBN-13 978-0-87849-43, ISSN 1013-9826.
  6. Del Prete A., Primo T., Papadia G., Manisi B., “Process Rules for Sheet Metal Hydroforming”, ISC 5th International Simulation Conference, Delft, The Netherlands, EUROSIS publication, June 2007, ISBN 978-90-77381- 34-2, pp. 109-113.
  7. Del Prete A., Elia A., Primo T., Manisi B., “Process Automation Tools Development for Sheet Metal Hydroforming Simulation”, ISC 5th International Simulation Conference, Delft, The Netherlands, EUROSIS publication, June 2007, ISBN 978-90-77381-34-2, pp. 114-118.
  8. Del Prete A., Primo T., Anglani A., “Improvement of Sheet Metal Hydroforming Simulation Reliability”, 8th A.I.T.e.M. Conference, Enhancing the Science of Manufacturing, September 10-12nd 2007, Montecatini Terme, ISBN 88-7957-264-4, pp. 111-112.
  9. D. Bardaro, T. Primo, S. Schipa, A. Gerardi, G. Pasquero, M. Martena, “Thermomechanical and reliability analysis for the design of an innovative gas turbine ceramic vane”, EnginSoft User’ Meeting, 25-26 October 2007, Bergamo.
  10. Del Prete A., Anglani A., Primo T., Spagnolo A., “Non-Conventional Metal Forming Tooling set up through Computer Aided Simulation”, APCOM’07, December 3-6, 2007, Kyoto, JAPAN.
  11. A. Del Prete, T. Primo, A. Elia, “CAE tools as valid opportunity to improve quality control systems performances for sheet metal formed components”, 9th Biennial ASME Conference on Engineering Systems Design and Analysis" (ESDA 08) - Haifa, Israel, ISBN: 978-0-7918-4835-7 pp. 329-334.
  12. A. Del Prete, A. Anglani, T. Primo, A. Spagnolo, “Computer Aided Simulation as valid tool for sheet hydroforming process development”, International Journal of Material Forming (2008), Suppl 1:317–322, DOI 10.1007/s12289-008-0340-5, ©Springer/ESAFORM 2008, ISSN 1960-6206 (Print), ISSN: 1960-6214 (On line).
  13. Del Prete A., Strano M., Primo T., Mentella A., “Localized warming of sheet metal parts for the reduction of springback”, 7th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Numisheet 2008, September 1-5, 2008 – Interlaken, Switzerland, ISBN 978-3-909386-80-2, pp. 521-526.
  14. Del Prete A., Anglani A., Primo T., Manisi B., “Numerical and Experimental Validation for Sheet Metal Hydroforming Process Rules”, Steel research international 79 (2008), Special Edition Metal Forming Conference 2008, Volume 2, pp. 301-308, ISBN 978-3-514-00754-3.
  15. A. Del Prete, A. Anglani, T. Primo, A. Elia, “Numerical Simulation as support tool for quality control system development for sheet metal stamped parts”, International Conference on Technology of Plasticity, 7-11 September 2008, Korea.
  16. A. Anglani, A. Del Prete, T. Primo, A. Caruso, S. Paiano, “Sistemi di Sviluppo ed Ottimizzazione del Processo di Stampaggio di Componenti Aeronautici in Leghe di Alluminio e Materiali Innovativi”, Giornata sulla Ricerca nel Settore Aerospaziale in Puglia, 4 Dicembre 2008, Bari.
  17. A. Del Prete, T. Primo, G. Papadia, B. Manisi, “Feasibility evaluation of sheet metal hydroformed components through shape factors application”, Key Engineering Materials Vols. 410-411 (2009) pp. 25-36, ©(2009) Trans Tech Publications, Switzerland, doi: 10.4028/www.scientific.net/KEM.410-411.25, ISSN 1013-9826, ISBN 0-87849-336-0, ISBN-13 978-0-87849-336-4.
  18. A. Del Prete, T. Primo and A. Anglani, A. Caruso, S. Paiano, “Springback Compensation for Large Size Metal Formed Aeronautic Components”, AITeM 2009 – 9° Convegno Associazione Italiana di Tecnologia Meccanica, Enhancing the Science of Manufacturing, 7-9 September 2009, ISBN 88-95057-07-4.
  19. T. Primo, A. Anglani, A. Elia, A. Caruso, “Non Conventional Metalforming Process Automation”, European HyperWorks Technology Conference (EHTC) 2009, 2-5 November 2009, Ludwigsburg, Germany.
  20. A. Del Prete, T. Primo and A. Anglani, “Development of a non conventional bulging test through numerical simulation”, CIRP ICME '10 - 7th CIRP Int. Conf. on Intelligent Computation in Manufacturing Engineering, 23-25 June 2010, Capri, ISBN 978-88-95028-65-1.
  21. Del Prete Antonio, Primo Teresa, Anglani Alfredo, “Metal forming process effect evaluation on structural behavior of an aeronautic panel”, CP1252, ©2010 American Institute of Physics, edited by F. Barlat, Y. H. Moon, and M. G. Lee, pp. 320-327, ISBN 978-0-7354-0800-5.
  22. Del Prete A., Primo T., Strano M., “The use of FEA packages in the simulation of drawing operation with springback, in the presence of random uncertainty”, Finite Elements in Analysis and Design Journal, 46 (2010), pp. 527-534.
  23. A. Del Prete, T. Primo, A. Anglani, “Metodi ed Applicativi di supporto alla progettazione ed ottimizzazione dei processi di stampaggio lamiera in ambito aeronautico”, Analisi e Calcolo (A&C), 45 (2011) pp. 9-13, ISSN 1128-3874.
  24. A. Del Prete, T. Primo, A. Anglani, “Strumenti di Engineering intelligence per la gestione e la verifica della fattibilità di componenti ottenuti mediante stampaggio lamiera in ambito aeronautico”, Analisi e Calcolo (A&C), 47 (Novembre 2011) pp. 11-15, ISSN 1128-3874.
  25. A. Del Prete, T. Primo, G. Papadia, B. Manisi, “Design for Manufacturing for Energy Absorption Systems”, The 14th International ESAFORM Conference on Material Forming AIP Conf. Proc. 1353, 1620-1625 (2011); doi: 10.1063/1.3589748, © 2011 American Institute of Physics ISBN: 978-0-7354-0911-8.
  26. A. Del Prete, G. Papadia, A. A. De Vitis and T. Primo, “Finite Element Simulations for Sheet Warm Hydroforming”, The 14th International ESAFORM Conference on Material Forming, AIP Conf. Proc. 1353, 313-318 (2011); doi: 10.1063/1.3589534, ©2011 American Institute of Physics, ISBN: 978-0-7354-0911-8.
  27. A. Del Prete, G. Papadia and T. Primo, “Sheet metal forming process design rules development”, Key Engineering Materials Vol. 473 (2011), pp. 765-772, ISSN 1013-9826, ©(2011) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/KEM.473.765. ISBN 3-03785-083-1.
  28. A. Del Prete, T. Primo, G. Papadia, “Computer Aided Modelling of Tangential Stretch Forming of Titanium Alloy Aeronautical Panels”, 10th International Conference Technology of Plasticity, 25-30 September, Aachen, Germany (ICTP 2011), pp. 649-654, ISBN 978-3-514-00784-0.
  29. T. Primo, B. Manisi, “Engineering data management for metal forming process”, European HyperWorks Technology Conference (HTC) 2011, 7-9 November 2011, Bonn, Germany.
  30. A. Del Prete, G. Papadia, T. Primo, “Bending Testing Rig Development through CAE Tools Application”, Key Engineering Materials Vols. 504-506 (2012), pp. 803-808, ©(2012) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/KEM.504-506.803, ISSN 1013-9826, ISBN – 13 978-3-03785-366-5.
  31. A. Del Prete, G. Papadia, T. Primo and S. Schipa, “Blank Shape Optimization in Sheet Hydroforming Process”, Key Engineering Materials Vol. 549 (2013), pp. 197-204, ©(2013) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/KEM.549.197, ISSN 1013-9826, ISBN – 13: 978-3-03785-671-0.
  32. A. Del Prete, G. Papadia, T. Primo and E. Mariano, “Development of accurate numerical models for bending of aluminum tailored blanks”, Key Engineering Materials Vol. 549 (2013), pp. 205-212, ©(2013) Trans Tech Publications, Switzerland, doi: 10.4028/www.scientific.net/KEM.549.205, ISSN 1013-9826, ISBN – 13: 978-3-03785-671-0.
  33. G. Papadia, T. Primo and S. Schipa, “Numerical modeling of ductile plastic damage in tensile test”, Key Engineering Materials, Vols. 554-557 (2013), pp. 93-98, ©(2013) Trans Tech Publications, Switzerland, doi: 10.4028/www.scientific.net/KEM.554-557.93, ISSN 1013-9826, ISBN-13: 978-3-03785-719-9.
  34. A. Del Prete, G. Papadia, T. Primo and E. Mariano, “Modelling of damage in blanking processes”, Key Engineering Materials, Vols. 554-557 (2013), pp. 2432-2439, ©(2013) Trans Tech Publications, Switzerland, doi: 10.4028/www.scientific.net/KEM.554 557.2432, ISSN 1013-9826, ISBN-13: 978-3-03785-719-9.
  35. A. Del Prete, T. Primo, R. Franchi, “Super-Nickel Ortogonal Turning Operations Optimization”, Procedia CIRP 8 (2013) 164 – 169, Published by Elsevier B.V., 14th CIRP Conference on Modelling of Machining Operations (CIRP CMMO) ISSN: 2212-8271.
  36. A. Spagnolo, T. Primo, G. Papadia and A. Del Prete, “Numerical – experimental correlation of sheet hydroformed component”, Key Engineering Materials Vols 651-653 (2015) pp 1140-1145, ©(2015) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/KEM.651-653.1140.
  37. R. Franchi, A. Del Prete, T. Primo, “The use of FEA in the simulation of a metal cutting operations in the presence of random uncertainty”, Key Engineering Materials Vols 651-653 (2015) pp 1247-1254, ©(2015) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/KEM.651-653.1247.
  38. T. Primo, G. Papadia and A. Del Prete, “Shape factors and feasibility of sheet metal hydroformed components”, Key Engineering Materials Vols 651-653 (2015) pp 1134-1139, ©(2015) Trans Tech Publications, Switzerland, doi:10.4028/www.scientific.net/KEM.651-653.1134.
  39. A. Del Prete, D. Franchino, T. PrimoL’utilizzo delle servo presse nella formatura delle lamiere”, Lamiera Maggio 2016.
  40. M. Calabrese, T. Primo and A. Del Prete, “Optimization of a new concept design and the performance improvement of an industrial test case”, Nafems World Congress 2017.
  41. M. Calabrese, T. Primo and A. Del Prete, “Optimization of machining fixture for aeronautical thin-walled components”, CIRP Design Conference 2017, Procedia CIRP 60 (2017) 32 – 37.
  42. M. Calabrese, T. Primo and A. Del Prete, “Lattice structures integration with conventional topology optimization”, AIP Conference Proceedings, ISBN: 978-0-7354-1580-5, Volume number: 1896 (proceedings of the 20th international Esaform conference on material forming: Esaform 2017).
  43. T. Primo, M. Calabrese, A. Del Prete, A. Anglani, “Additive manufacturing integration with topology optimization methodology for innovative product design”, International Journal of Advanced Manufacturing Technology, (2017) 93:467–479 DOI 10.1007/s00170-017-0112-9.
  44. M. Calabrese, T. Primo, A. Del Prete, G. Filitti, “Towards the definition an innovative supply chain: AMSA, an application of the cloud manufacturing”, AIP Conference Proceedings 2113, 150004 (2019); https://doi.org/10.1063/1.5112680, 22nd International Conference on Material Forming (ESAFORM 2019).
  45. M. Calabrese, T. Primo, A. Del Prete, V. Capalbo, “Integration of Topology Optimisation Techniques and Additive Manufacturing: Innovative Elements”, ISBN 978-88-941195-3-4, (contribution to the book), 2018.
  46. G. Filitti, A. Del Prete, T. Primo, M. Calabrese, “AMSA – Additive Manufacturing Spare Parts Market Application”, ISBN 978-88-941195-8-9, (contribution to the book), 2019.
  47. A. Del Prete, T. Primo,Sheet Metal forming optimization methodology for servo presses process control improvement”, Metals 2020, 10, 271; doi:10.3390/met10020271.
  48. A. Del Prete, T. Primo,Innovative Methodology for the Identification of the Most Suitable Additive Technology Based on Product Characteristics”, Metals 2021, 11, 409. https://doi.org/10.3390/met11030409.
  49. T. Primo, A. Begher, A. Del Prete, “ Process parameters influence on structural performances of SLM and EBM lattice structure”,  XV AITEM Conference 2022.
  50. M. Calabrese, T. Primo, A. Del Prete, G. Filitti, “Nesting algorithm for optimization part placement in additive manufacturing”, The International Journal of Advanced Manufacturing Technology, https://doi.org/10.1007/s00170-021-08130-y, 13 January 2022.
  51. T. Primo,  M. Calabrese, V. Capalbo, G. Filitti, L. Agnusdei, “Studio di tecniche di machine learning a supporto dei processi di additive manufacturing”,  ISBN: 978-88-941195-5-8, (contribution to the book), 2021.
  52. A. Pirinu, T. Primo, A. Del Prete, F. W. Panella, F. De Pascalis, “Mechanical behaviour of AlSi10Mg lattice structures manufactured by Selective Laser Melting (SLM)”, The International Journal of Advanced Manufacturing Technology, December 2022, https://doi.org/10.1007/s00170-022-10390-1.
  53. V. Capalbo, G. Filitti, T. Primo, M. Calabrese, “Analisi numerica microstrutturale di componenti ottenuti mediante Additive Manufacturing”, ISBN: 978-88-94119596, (contribution to the book), 2022.
  54. M. Calabrese, A. Del Prete, T. Primo, V. Capalbo, G. Filitti, “Caratterizzazione meccanica di un sistema di afferraggio per componenti a parete sottile sviluppato con metodologie DfAM e realizzato mediante tecnologia additiva SLM”, ISBN: 9788894733501, (contribution to the book), 2022.
  55. T. Primo, M. Calabrese, R. Franchi, V. Capalbo, G. Filitti, “Sviluppo di una soluzione di Digital Twin a supporto dei processi di metalforming”, ISBN: 9788894119572, (contribution to the book), 2022.
  56. Leo Paola, Del Prete Antonio, Primo Teresa, Nacucchi Michele, “Al-Si10-Mg Manufactured by Selective Laser Melting: Microstructure Sensitivity to Close Values of the Heat Input”, Metals 2023, 13(3), 590; https://doi.org/10.3390/met13030590.
  57. Elisabetta Lucia De Marco, Antonella Longo, Teresa Primo, Maurizio Calabrese, “Innovative training on additive manufacturing: AMTE@CH learning experience”, The Experiment@ International Conference 2023 (Expat’23), Evora, Portugal, 05-07 June, 2023.
  58. Attanasio Aldo, Antonio Del Prete, Teresa Primo, “Numerical and analytical estimation of rolling force and torque in hot strip rolling”, The International Journal of Advanced Manufacturing Technology, under review.

  59. Andrea Alaimo, Antonio Del Prete, Giuseppe Mantegna, Calogero Orlando, Francesco Willem Panella, Teresa Primo, Davide Tumino, Carmelo Rosario Vindigni, “Modified beam modeling of powder bed fusion manufactured lattice structures”, International Journal of Mechanical Sciences 259 (2023) 108599,  https://doi.org/10.1016/j.ijmecsci.2023.108599.